Another mirror mod.


SiGPiGomer

New Member
Very nice, I think I finally found the mirrors I am going to use. Any other tips you can give with the install. I am ordering my mirrors right now.
 

kevcoop

New Member
Yup, I found the mirrors I want. The pictures of the clearance from the handlebars to the mirrors sold me.

Thanks BondGirl for all the help.
 

BondGirl

New Member
Very nice, I think I finally found the mirrors I am going to use. Any other tips you can give with the install. I am ordering my mirrors right now.
hm this mod is easy. like reeeeealy easy.
1- removed the black plastics around cluster and covering the mirror nuts
2- remove nuts with 10mm ratchet
3-remove mirro from the bike and remove the rubber thingy.

4-install the rubber thing on you new ZX mirrors.
5- THE HARDEST PART. carefully make sure the rubber thingy goes between fairing and mirror all around. Otherwise scratch can occur. OR rubber may lift a little at highway speed.
6-put nut on the rear screw do not tight yet.
7-press the mirror hard to fit the second nut.
8- tight both nut/

locktite can be used but not necessary.
put back the plastic covers.
Grab a beer and show off hehehe
 

JSP

Super Moderator
if i wasnt such a fan of my bar end mirror i would go this route... nice job, looks great.
Ha! with that smiley dude it made me think "if I wasnt such a fan of my one tooth...i'd get dentures." Or something like that??? I'm not fat! I'm larger than life!!!!
 

jotapeh

New Member
Hmm. The look is growing on me, a little...

Well, maybe I'll drive by it in person someday :canada:

thanks for taking the time to snap pics/upload, etc..
 

tractorboy

New Member
Wow!! Can Bondgirl give you THE PICS OR WHAT!!

anything you want to know she has it documented and pictured!!

I nominate Bondgirl official mod pic taker of the forum!

SHe will have to go and take pics of everyones mods as she get all the INFO!!!!!

WhooHooo Bond girl!!

:cool:
 

diji000

New Member
thank u so much for posting about this mod. i just ordered the same mirror. I think it really makes the bike look alot better. i'm working on some mods now too. i'll post pics when i'm done.
 

Detrich

New Member
Wow thanks bondgirl.... Pix n mirrors look great!!

:)
 

cavcuz05

New Member
Not matter what mirror you use...MSF still states to look over your sholder to check your blind spots:thumbup:
 

BondGirl

New Member
Happened to notice you have aftermarket foot pegs. I really like the look and angle of those. What brand are they?
which side haha
right side ( silver peg) is R6R 2006-2007 with some minor mods
Left side ( black) is Kawi ZX6 2007-2008 pegs. required grinding and mod as well.

they are not so good. They are not bad but I am still looking for something better!!!
 

clsmoove

New Member
tools needed?

Bondgirl,

Thanks soooo much for sharing! I actually got my mirrors today, and am about to attempt my first mod on my own. :confused:

Does the 10mm ratchet come in the toolkit by any chance? Are there any other tools needed outside of what comes with the bike?

Thanks!

clsmoove
 

BondGirl

New Member
Bondgirl,

Thanks soooo much for sharing! I actually got my mirrors today, and am about to attempt my first mod on my own. :confused:

Does the 10mm ratchet come in the toolkit by any chance? Are there any other tools needed outside of what comes with the bike?

Thanks!

clsmoove
allen key to rermove the black platic trim.
10mm socket

everything Is inthe tool kit.But real tools will make your life easier hhehehe
 

ksanbon

New Member
clsmmove,

What mirrors did you get? eBay?
How much?
How do they look?

Thank you!

BTW, Bondgirl's installation instructions were spot on!
 
Last edited:

kevcoop

New Member
I just installed my kawi mirrors and boy what a differance.

$30.00 and the bikes already starting to look better.

Thanks Bondgirl!!
 


Top