What did you do to your bike today?
- Thread starter Diluted
- Start date
Bert-Aus
Well-Known Member
Wide screen tv in front and turn on the travel chanel, or youtube ride vids!
Sent from my LT18i using Tapatalk 2
I could use the 19 inch tv thats out there already lol!
you scrape pegs on that baby yet? im looking to upgrade my cruiser right now but with something used. A kawi 900 or a shadow 750 maybe.
I haven't taken it down that low most likely won't either lol.
RyanChristenson
New Member
Flush turn signals and garage door opener on the dummy button. Last week was fender eliminator and frame sliders.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
I put the exact same grips on my woodcraft clip-ons and love them. Look and feel much better than stock.
VRIIClubby
New Member
finally fitted some parts I purchased a few months ago.
fitted Block off plates, a C-Tek battery tender and finally the Juice Box Pro.
cannot believe how much quicker the bike runs! like chalk and cheese, I wasn't expecting it to be "that" much quicker. loving it~!
edit - oh yeah I also modded the airbox with 2 x 40mm holes.
fitted Block off plates, a C-Tek battery tender and finally the Juice Box Pro.
cannot believe how much quicker the bike runs! like chalk and cheese, I wasn't expecting it to be "that" much quicker. loving it~!
edit - oh yeah I also modded the airbox with 2 x 40mm holes.
Last edited:
Bert-Aus
Well-Known Member
Cut the whole bottom out of the airbox for more of a throaty roar up the rev range!
I endorse it! I only wish I did mine sooner
Sent from my LT18i using Tapatalk 2
VRIIClubby
New Member
cheers mate, did you cut out the centre stack in there? (original port thingo)
noticed a lot more sound tonight from it, may have to put my dbk back in.
just got a new job last week and a few of the shift start times are around 3 and 5am in the morning...my neighbours may hate me after a week of very early starts!
I am finishing up detailing my bike today, it was stripped down to the frame and the only thing not removed was the gas tank. All paint got washed, clay barred and is getting a second coat of wax today while all black plastics got hit with back to black. Frame got covered in vinyl yesterday and it came out way better than I expected. I am cleaning my K&N today, just ordered a set of spark plugs. I tinted my rear tail light red, and putting in a new battery today. I think I am going to have to make a new thread with all the stuff I am doing
Best part, my new chain guard that I ordered from England is coming in today and is going to be covered in gloss black vinyl for now and maybe red later depending on if I change my mind or not. It came down to that or a radiator guard/cover but in the end I think I made the write call.
Best part, my new chain guard that I ordered from England is coming in today and is going to be covered in gloss black vinyl for now and maybe red later depending on if I change my mind or not. It came down to that or a radiator guard/cover but in the end I think I made the write call.
I really hope the grips cut down on the vibrations. Its needs to get warmer out so I can test them
Don't know if it cuts it down more, but it certainly didn't increase. Look much better too.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Bert-Aus
Well-Known Member
cheers mate, did you cut out the centre stack in there? (original port thingo)
noticed a lot more sound tonight from it, may have to put my dbk back in.
just got a new job last week and a few of the shift start times are around 3 and 5am in the morning...my neighbours may hate me after a week of very early starts!
Snorkel thing?
Yep, I cut lower portion of the intake area off with a jigsaw.
Cleaned the edges up with a steel edge to make it tidy, without any sharp burrs.
BTW remember these guys?
Sneakynuts
New Member
I ordered my fender eliminator!!!
Pull my FE off and installed JT stock fender. I did fit my FZ09 front signals to have the running/signal lights still. My old one is still top shape but I notice once off the bike that the wire were all wore through. Might have forgot to crank some preload riding 2up and bottom the FE and rip some wires off. Ah well, I have the big rack there with all 3 cases... no point of having a FE anyway.
Nice fit... pure luck! LOL
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Nice fit... pure luck! LOL
Sent from my SAMSUNG-SGH-I337 using Tapatalk
i washed and waxed my bike with waterless cleaner the other day, but there has been 6 inches of snow on the ground since tuesday and its been below freezing all week, looks like it will be that way for the next week or longer so theres not much to do with my bike right now..... i have the itch to do something but being unemployed limits my money down to what i really need... therefore no heater in the garage....there fore no me in the garage lol.... i could use a release i have been in the house too long... .... anyone got caterpillar tracks i can borrow to put on my bike!!??
.... anyone got caterpillar tracks i can borrow to put on my bike!!??