New update after another productive weekend! Thanks Cali_Rider for all the help!
We dropped the forks to replace the oil and re-packed the steering bearing (which needed it badly!)... The chain was also thoroughly cleaned (off the bike) and the master link was swapped with a new one.
Cali_Rider helped install a hoist in my garage (Harbor Freight rocks! it was $10!)... here are a few pics:
Also, my hotbodies track plastics got delivered this morning!! (I just checked the tracking info)... which means I am only waiting on the Ron Ayers parts (delivery expected for Wednesday), along with the braided brake lines (bastards said "stock" on their website, but it was actually on back order...)... hopefully I'll get the lines this week too...
So here is what's left on the "to do list":
1 chain/sprockets: inspect/clean/adjust:
DONE!
2 check battery:
DONE!
3 drain fuel from tank
4 oil + filter change
5 replace all coolant hoses
6 replace fuel line
7 flush cooling system (use water wetter)
8 change fork oil:
DONE!
9 check steering head bearings and re-pack grease:
DONE!
10 check/replace air filter
11 fix handlebar end (right side is loose):
DONE!
12 replace spark plugs:
DONE!
13 re-build front brake
14 check valves and adjust:
DONE!
15 find and fix the electrical turn signal issue
16 check/adjust engine idle speed
17 check/adjust clutch cable:
DONE!
18 check/torque main bolts
19 lub control levers + brake pedal, gear shift and side stand pivots
20 install track plastics
:rockon: (thanks John!).
)
