I've found the following threads which offer some info:
Motodynamic intergrated tail light - hazards not working? - Yamaha FZ6 Forums - International FZ6 Motorcycle Community Forum
Hazard lights - flash once then stop - Yamaha FZ6 Forums - International FZ6 Motorcycle Community Forum
Hazard lights not working after fitting mini indicators ? - Yamaha FZ6 Forums - International FZ6 Motorcycle Community Forum
My Hazard lights don't work (after LED indicator installation) - Yamaha FZ6 Forums - International FZ6 Motorcycle Community Forum
Motodynamic tail light spliced with led turn signals, malfunctioning - Yamaha FZ6 Forums - International FZ6 Motorcycle Community Forum
But none of them have a definitive answer or anything I can work with. So I'll ask you guys.
I've just installed these blinkers on the front:
New Genuine Yamaha Carbon LED Indiators YME-W0789-20 YZF R1 R6 R125 Flasher | eBay
They include the in-line resistors.
I have a moto-dynamic rear tail-light with integrated blinkers. This also has an in-line resistor.
Motodynamic tail light & Standard front blinkers = No problems.
Motodynamic tail light & One LED front blinker & One Standard front blinker = No problems
Motodynamic tail light & Both LED front blinkers = Problem.
The problem - My hazard lights flash once and then stop. I then have to wait 3 seconds before I can use my blinkers or try the hazards again.
It seems the hazards are over-loading the bike and cutting out for 3 seconds.
Any ideas on a fix? The blinkers work perfectly fine, it is only when I try the hazards then it fails.
Thanks guys.
Motodynamic intergrated tail light - hazards not working? - Yamaha FZ6 Forums - International FZ6 Motorcycle Community Forum
Hazard lights - flash once then stop - Yamaha FZ6 Forums - International FZ6 Motorcycle Community Forum
Hazard lights not working after fitting mini indicators ? - Yamaha FZ6 Forums - International FZ6 Motorcycle Community Forum
My Hazard lights don't work (after LED indicator installation) - Yamaha FZ6 Forums - International FZ6 Motorcycle Community Forum
Motodynamic tail light spliced with led turn signals, malfunctioning - Yamaha FZ6 Forums - International FZ6 Motorcycle Community Forum
But none of them have a definitive answer or anything I can work with. So I'll ask you guys.
I've just installed these blinkers on the front:
New Genuine Yamaha Carbon LED Indiators YME-W0789-20 YZF R1 R6 R125 Flasher | eBay
They include the in-line resistors.
I have a moto-dynamic rear tail-light with integrated blinkers. This also has an in-line resistor.
Motodynamic tail light & Standard front blinkers = No problems.
Motodynamic tail light & One LED front blinker & One Standard front blinker = No problems
Motodynamic tail light & Both LED front blinkers = Problem.
The problem - My hazard lights flash once and then stop. I then have to wait 3 seconds before I can use my blinkers or try the hazards again.
It seems the hazards are over-loading the bike and cutting out for 3 seconds.
Any ideas on a fix? The blinkers work perfectly fine, it is only when I try the hazards then it fails.
Thanks guys.