W
whatever
my handlebars seemed to be pulled to the right little when i am driving straight.
is it possible when the bike was built the clamp bolts for the triple tree were tighten down with the steering being cock to the right alittle.
or do the forks straighten out by them self when the wheels is installed.
i was trying to figure out how i could tweak them back to the left alittle.. but i was thinking if i loosen the triple tree bolts will the forks drop... really have no way to surport the front end i only have a rear stand for the bike.
the dealer is 65 miles away so i was trying to see if i could fix it myself... i was thinking about marking the cap fork bolts with some chalk and make a line on the tree to. would i have to loosen the steering center bot also.
i was going to try and.... put the bike on the rear stand and string a line and see how far the bars are off to the right.
or being that the bottom of the fork is separate from the top of the tube... will it then take up minor corrections.
is it possible when the bike was built the clamp bolts for the triple tree were tighten down with the steering being cock to the right alittle.
or do the forks straighten out by them self when the wheels is installed.
i was trying to figure out how i could tweak them back to the left alittle.. but i was thinking if i loosen the triple tree bolts will the forks drop... really have no way to surport the front end i only have a rear stand for the bike.
the dealer is 65 miles away so i was trying to see if i could fix it myself... i was thinking about marking the cap fork bolts with some chalk and make a line on the tree to. would i have to loosen the steering center bot also.
i was going to try and.... put the bike on the rear stand and string a line and see how far the bars are off to the right.
or being that the bottom of the fork is separate from the top of the tube... will it then take up minor corrections.