will415
New Member
Got my mirrors in but here is my problem at about 80 or 85 they get really bad vibration, is there any way around that or anything i can do. 
-
Welcome to the Yamaha FZ6R Forums. Member registration disables ads and allows you to post and share. Register Here.
No more rabbit ears! MIRRORS MIRRORS
- Thread starter xXMotoSniperXx
- Start date
Are you sure they are bolted tight enough? Did you use a piece of rubber underneath the mount? I didn't use rubber although I will probably take them off at some point and cut some rubber for underneath them. It should help dampen the wind effects. I haven't noticed any problems with mine, but then again I don't normally ride at 85. I'm still breaking my bike in.Got my mirrors in but here is my problem at about 80 or 85 they get really bad vibration, is there any way around that or anything i can do.
Do you have a pic of the finished product?will415
New Member
Are you sure they are bolted tight enough? Did you use a piece of rubber underneath the mount? I didn't use rubber although I will probably take them off at some point and cut some rubber for underneath them. It should help dampen the wind effects. I haven't noticed any problems with mine, but then again I don't normally ride at 85. I'm still breaking my bike in.
Here is a pic
Attachments
Wow looks good with the blacked out screen and the zx6r mirrors. Looks more supersport. I would try a small piece of rubber the size of the base under each and make sure the bolts are good and tight. Did the mirrors move on you at 85? My one mirror had a loose screw and it moved under speed. Not the mounting base screws, the one for adjustment.
will415
New Member
The base is nice and tight it seems to move from the uper part of the mirror the part that hold the glass in place I could be.wrong but that whole upper part seems to be what moves to me.
efforex
New Member
I just ordered zx-6r ebay mirrors that work hopefully ill get them soon and ill post pics.
Last edited:
The zx-6r mirrors are bolt on if that's what you are asking.
Synyster
New Member
Thanks. So the ones I linked should just bolt right into the stock ones slots?
The ones you linked are r6 mirrors. Not sure if they're a direct fit. I used zx-6r mirrors (ninja).
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
Synyster
New Member
Got my ZX6R mirrors on today. It's nice to see whose behind me now 
Easy install and fight right in the stock holes.
Easy install and fight right in the stock holes.
They look good, pig spotters look nice but aren't functional.
Finally got rid of those awful mirrors
Check these out. Let me know what you think...
These are advertised as universal. And I was very impressed with level / amount of adjustability. Love the look and very cheap. $17 and free shipping.
I did have to make one hole on each side slightly bigger.
Sent from my one and only iPhone using Tapatalk
Check these out. Let me know what you think...
These are advertised as universal. And I was very impressed with level / amount of adjustability. Love the look and very cheap. $17 and free shipping.
I did have to make one hole on each side slightly bigger.
Sent from my one and only iPhone using Tapatalk
leovito
New Member
Here is a pic of my bike. I got the pigglet mirrors. as one said earlier they are pretty much useless. but as far as looks. dont think you can beat the sleek look.
They look like Ninja 250 mirrors. Look nice, but viewing area looks small. Do you have decent view?
They are definitely not the ninja 250 mirrors but do look similar. They are very compact thus smaller viewing area is significantly smaller. Its location is still where I can see behind me although my hands / arms are significantly in the way. I'll write a review once I drive with the now mirrors some more
Sent from my one and only iPhone using Tapatalk
They look good but I'm sure they have a little less visibility then the zx6r mirrors. But anything is better then the rabbit ears. Blacked out screen, better mirrors and flush mounts change the whole appearance of the bike.
Very much agree. I've completed those three. I'm am very pleased with the way my bike is shaping up. Not a whole lot I want to do to it immediately atleast.
Sent from my one and only iPhone using Tapatalk
Same here, much better look. The only thing I REALLY wanna still do is my exhaust (Marthy Delkevic or Viper). I'd like to do the clip-ons but the exhaust is a must IMO.
Clip ons and HID are my next top 2.
Sent from my one and only iPhone using Tapatalk
Sent from my one and only iPhone using Tapatalk
