Marthy Exhaust Group

[Rob]

Trying another option. If some of you remember the Danmoto try oval that Rabbitman got for his FZ1, black anodize aluminum with stainless steel cap. They come in 18" long only I think. I've been going back and forth with them for a bit because I want to find another option than the Viper can since supplies seams to be an issue. So I finally made a deal with them. The can will be customize for our application. Overall length will be similar to the Viper can. Minimum order was 5. I should get them within few weeks to test them and most important, if everyone likes it!

It will cost a bit more since it's custom made but not more than what we actually pay for the Viper can. There's a nice DBKiller available with the can that insert inside the inlet... no hardware required!

Is this going to be a slip-on option since the CF slip-on didn't work out, or is this going to be a replacement for a Viper full system exhaust?

 

[JT]

Is this going to be a slip-on option since the CF slip-on didn't work out, or is this going to be a replacement for a Viper full system exhaust?

I'm pretty sure he mods the stock header to accept slip on's.

Witch would make all his can options a slip on


Sent from my one and only iPhone 5 using Tapa 2 da talk

 

[Scott_Thomas]

I'm pretty sure he mods the stock header to accept slip on's.

Witch would make all his can options a slip on


Sent from my one and only iPhone 5 using Tapa 2 da talk

JT is 100% correct. Slip-ons are only possible on bikes the are set up to accept them. Martin welds a midpipe to the stock headers right where the stock can was at. SS's generally are set up to accept slip-ons from day one.

 

[Marthy]

Danmoto Marthy special are in!!!

I'll bang for that puppy on the 6R after work for a test ride. With or without DBK?

Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

 

[Rabbitman109]

Danmoto Marthy special are in!!!

I'll bang for that puppy on the 6R after work for a test ride. With or without DBK?

Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

Marthy, mine is borderline too loud with the DBkiller in, couldn't imagine the exhaust without it.

 

[bleedinblue]

Marthy, mine is borderline too loud with the DBkiller in, couldn't imagine the exhaust without it.

It be like mine, without!!! lol

 

[MNGreg]

I really like that new exhaust Marthy!.. If only I wasnt poor right now!

Ohh the toys I want, when I win the lottery! Nah, when I have more funds again:
Buy a stock fz6r exhaust from someone.
Send it to Marthy for mod.
Comfy Corbin seat so booty doesnt get sore afte 1 1/2 hrs.

-all relatively high $ things!

 

[Riccochet]

Do want! :rockon:

 

[Marthy]

Marthy, mine is borderline too loud with the DBkiller in, couldn't imagine the exhaust without it.

Yours Is a bit shorter if I can remember and is a 2 3/8" outlet, those are 2" outlet. Should be a bit quieter. The DBk fit in the inlet so no drilling of fitting. Quality look better than he Viper can in my opinion. The best part... 2 weeks from order to my door step from China! I takes a week from IL if they don't forget to put the order in...

But it all come down to what everyone one likes... not me.

 

[Marthy]

There she is...


I like it! Sound a bit different comoare to the Viper can. Without the DBK its a biy loud... but I got usr to the DBK on the Viper can now for quite some time.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

 

[JSP]

There she is...


I like it! Sound a bit different comoare to the Viper can. Without the DBK its a biy loud... but I got usr to the DBK on the Viper can now for quite some time.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

That looks really good Martin! Plenty of room for the brake to be fully pressed down?

 

[Marthy]

Thanks. Ok without the DBK its a bit louder than the Viper but it feel lighter too. With the DBK installed its like the Viper without the dbk.

On my bike it almost feel like the throttle response is better and pull harder on top too. But that can be in my head also... lol

It clear the brake pedal very nicely and im starting to wonder is I put the offset inward maybe the center stand will fit? But that's a long shot

Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

 

[Marthy]

The new Danmoto shorty with DBK (Marthy specs) - YouTube

 

[JSP]

Sounds good!

 

[Rob]

It clear the brake pedal very nicely and im starting to wonder is I put the offset inward maybe the center stand will fit? But that's a long shot

a long shot maybe but if it will work then it'll be on my short list of remaining mods. new can looks/sounds great marthy. great job

 

[MNGreg]

Looks AWESOME!!!!
*Kicking my a.. for being soo tight right now!

The heat from the exhaust isnt too close to the rear tire to cause problems on long rides either?

 

[Marthy]

Looks AWESOME!!!!
*Kicking my a.. for being soo tight right now!

The heat from the exhaust isnt too close to the rear tire to cause problems on long rides either?

Na, its all good. Just the angle of the picture... Best fit ever I think... hope everyone likes it. Fly N Cycle are running out of Viper and it will take a while before they get there next shipment.



Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

 

[bleedinblue]

Thanks. Ok without the DBK its a bit louder than the Viper but it feel lighter too. With the DBK installed its like the Viper without the dbk.

On my bike it almost feel like the throttle response is better and pull harder on top too. But that can be in my head also... lol

It clear the brake pedal very nicely and im starting to wonder is I put the offset inward maybe the center stand will fit? But that's a long shot

Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

I like it alot, the look and the sound

So you think its going to be to loud for some people?

If sound is a concern for a individual, what about using a slightly smaller header outlet for them so a reducer fits.Then welding a extra decibel killer onto the reducer?

 

[Marthy]

I like it alot, the look and the sound

So you think its going to be to loud for some people?

If sound is a concern for a individual, what about using a slightly smaller header outlet for them so a reducer fits.Then welding a extra decibel killer onto the reducer?

The DBK will be include in the price... so you can go baxk and forth if you want...

Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

 

[bleedinblue]

The DBK will be include in the price... so you can go baxk and forth if you want...

Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

Cool, you said with the dk installed its as loud as the Viper without it.I just thought it might be worth an attempt to make it as quiet as the Viper with the dk.

Just a thought