headlight mod


leovito

New Member
Hey all

Put a 8k blue kit in the bike for the new headlight. was wondering if anyone knew if they made a smoking headlight housing like they do the tail light.
 
Last edited:
Even without projector, you can do like posted... Open up the case and paint the inside black. Think that looks real good. ;)
 
Good point....
 
Check out the 4th gen camaros with the "whistler" mod. This is where they take the headlight apart and paint the non projected portions. Looks amazing.
 
I went out and got a can of the night shades can someone give me a run down of how to take the headlight housing out so i dont have to spend an hour trying to figure it out.
 
Thanks for the thread. But I thought that was a bit much work just to put a few coats of paint up. I just rigged the panel with lots of tape and plastice bags then went to work. heres some photos.

put plastic and tape up and started the sanding proccess
mailgooglecom-1.jpg


after sanding and putting 2 super light coats of VHT nightshades and 3 coats of gloss
9068_10151159483003813_1272133719_n.jpg


close up of the job the shine is from my camera flash not the bulb
32293_10151159483148813_645540606_n.jpg


still all the light goes through with the 8k blue bikemaster hid kit
928_10151159549713813_287722872_n.jpg
 

I have to admit, I was a little worried how it would turn out, but that looks pretty cool. Wouldn't be a look that I would want personally, but definitely gives a different look. Great job, very different.

+1
I wouldn't want to do anything to restrict light output at all.
 


Back
Top