Power crystal depth?
- Thread starter nismos14
- Start date
I know chad can do it! dont know what size but he can do it
The aussie model has a bulb in there as a running light.
Too shallow for an HID bulb. LED is your best bet. I got your pm, and responded. It does work really well with the Jam Straight bulbs. You can also get colored bulbs from here:
Custom LED Automotive LED Bulbs
This is the socket that you need to get:
Dorman/Marker Light Socket (85814) | AutoZone.com
You'll also need I think a 3/4" drill bit.
Custom LED Automotive LED Bulbs
This is the socket that you need to get:
Dorman/Marker Light Socket (85814) | AutoZone.com
You'll also need I think a 3/4" drill bit.
Yea, wish I could find the part to see what bulb it is. I couldn't find it anywhere. Is the Aussie also called a FZ6R? Maybe I can find the part.
Yeap!
Still an FZ6R down here.
Though the wiring will most likely bit a little different - some splicing and you can fix that!
Wouldn't have the foggiest idea what the part number etc is - i could do some ringing around if you'd like but I found this!
http://www.600cc.org/forum/f91/turning-power-crystal-into-running-light-14697/
Still an FZ6R down here.
Though the wiring will most likely bit a little different - some splicing and you can fix that!
Wouldn't have the foggiest idea what the part number etc is - i could do some ringing around if you'd like but I found this!
http://www.600cc.org/forum/f91/turning-power-crystal-into-running-light-14697/
Do you have an OEM parts website you order parts from that maybe I could reference?
Thanks for the link, a bit different then what I want to do, I will get to where I wanna go, I will just need to be a little ingenious to get there.
Not sure, in pics I saw fz6r on some of them. I was talking about it with one of the Aussies before, but I don't remember which one.
Sent from my SGH-I777 using Tapatalk 2
Check here:
Invalid Parameter Error
Here is the parts you want:
36C-84300-10
5JW-84346-00
5DM-84347-00
Invalid Parameter Error
Here is the parts you want:
36C-84300-10
5JW-84346-00
5DM-84347-00
There ain't much down here!
they got general stores and stuff but the only OEM stuff i've found is here:
2011 Yamaha FZ6R OEM Parts | MotoSport Australia
BUT!
When you go to headlight it gives you this:
All OEM products on this site are for USA models.
sooooo...who knows! haha
EDIT: Called my local dealer to try and get some info on it - apparently (according to them) its part of the head light which they wanted $608.00 AUD for...
EDIT2: go with what rabbitman said...even if the link is dead haha
they got general stores and stuff but the only OEM stuff i've found is here:
2011 Yamaha FZ6R OEM Parts | MotoSport Australia
BUT!
When you go to headlight it gives you this:
All OEM products on this site are for USA models.
sooooo...who knows! haha
EDIT: Called my local dealer to try and get some info on it - apparently (according to them) its part of the head light which they wanted $608.00 AUD for...
EDIT2: go with what rabbitman said...even if the link is dead haha
Last edited:
I just googled euro yamaha parts and got some stuff. Didn't see a way to order, and you kinda have to guess as it is mostly not english. I would make the trip to Autozone and do it that way.
so i went through the UK parts catalogue...after some back and forth its listed under the model XJ6F(A).
hope this works!
Im sure if you took your part numbers to your local yam dealer they could sort you out.
hope this works!
Im sure if you took your part numbers to your local yam dealer they could sort you out.
Thats what I had found, my link I guess just sucked. I bet the part numbers I posted will match.
Think I may have to go ahead and do this mod since it is relatively cheap and not too complicated. I should get the red bulbs and people will think I'm the PoPo with my blue angel eye. The blue bulb would look great in there. Custom LED is the same place that made my magic blinkers for my running light mod (front flushies). Can this be done without actually taking the headlight off?
Possibly. You may have issues getting it straight. Just follow this how to:
Pod Mod - Lights! - Yamaha FZ1 Forums - International FZ1 Motorcycle Community Forum
I think I'm gonna mod whore this one up. Will the maddness ever stop? LOL! Thanks Chad!
Let me know when you want to do it, maybe I can come and help ya out :thumbup: