going down? post here


demon408

New Member
my freind june-bug hit an oil slick, just like a video game. a volkswagon golf blew somthin out the bottom. he went down, no jacket, just gloves. and walked away. ps bikes ok too we finished the ride.
 

Attachments

  • phone pix 011.jpg
    phone pix 011.jpg
    87.5 KB · Views: 155
And that's why we always wear our gear, boys and girls!


ATGATT
 
05 gsxr 600

this is my old bike. been down 4 times. once with no gear just a helmet, lucky for me someones front yard broke my fall along with threr fence
 

Attachments

  • phone pix 007.jpg
    phone pix 007.jpg
    89.6 KB · Views: 169
dropped mine today, was practicing u-turns on the nearest parking lot and came to a stop while going into a turn, lost balance and dropped my bike. The good thing is that I've installed frame sliders just yesterday :) that saved the farings from being damaged. The frame slider itself got dented + some scratches on the rear view mirror case as it touched the ground
 
dropped mine today, was practicing u-turns on the nearest parking lot and came to a stop while going into a turn, lost balance and dropped my bike. The good thing is that I've installed frame sliders just yesterday :) that saved the farings from being damaged. The frame slider itself got dented + some scratches on the rear view mirror case as it touched the ground

Yay for frame sliders! :thumbup: That's one of the most common drops at slow speed. Always make sure the handle bars are straight when coming to a stop.
 
I took a slow speed drop on Saturday.There was a concrete addition to the road on a sharp corner, my front tire got caught in a "tire trap" gap between the main road and the added on part. I found out the next day that several other rides have gotten caught there too. Shift pedal got bent as did the clutch lever. I bent the shift pedal back in place when I got home. The frame sliders saved the fairing. The next day on a big bruise showed up on my leg were the bike landed.
 

Attachments

  • frame_slider.jpg
    frame_slider.jpg
    28.8 KB · Views: 120
  • shift_pedal.jpg
    shift_pedal.jpg
    41.7 KB · Views: 114
  • clutch_lever.jpg
    clutch_lever.jpg
    36.4 KB · Views: 105
Last edited:
okay, u walked away

I took a slow speed drop on Saturday.There was a concrete addition to the road on a sharp corner, my front tire got caught in a "tire trap" gap between the main road and the added on part. I found out the next day that several other rides have gotten caught there too. Shift pedal got bent as did the clutch lever. I bent the shift pedal back in place when I got home. The frame sliders saved the fairing. The next day on a big bruise showed up on my leg were the bike landed.

so does this give you the perfect reason to get pazzo levers?
 
Dropped mine today (4 days after purchase), made a u-turn on a road, cut wide to other edge, noticed a "little" sand, and thought I'd missed it, turned out to be a pile of sand with the pavement sloping away under it. Soon as I hit it, my front tire stopped and started sliding right, I was ok at that point, then back tire started sliding too........... with my leg already extended enough to hold up the bike when the front slid, I didn't have the reach to keep it from going down when the rear followed. Slid right about 2ft and down about 8 inches, was all it took.
Minor scratches to left fairing/mirror and turn signal, slightly bent clutch and shifter (was able to bend them back when I got back to work).
Guess most drops occur on slow speed turns, now I know to keep far away from edges of roads (especially if there's sand).


Lucky you had me there to help get it back up! What would you do without me??? :D

No, but seriously... glad it wasn't any worse. All that's left after fixing it up is a couple scratches. Couldn't even tell anything happened to the shifter after you bent it back.

How did the rest clean up?
 
I took a slow speed drop on Saturday.There was a concrete addition to the road on a sharp corner, my front tire got caught in a "tire trap" gap between the main road and the added on part. I found out the next day that several other rides have gotten caught there too. Shift pedal got bent as did the clutch lever. I bent the shift pedal back in place when I got home. The frame sliders saved the fairing. The next day on a big bruise showed up on my leg were the bike landed.

Yea, I bent the same things on my bike a couple months back. The pieces are easy to fix but I didn't have frame sliders when it happened to me so I had to get the fairing repainted. At least you had frame sliders to save most of it.
 
went down about a month ago, hit soft dirt going 30mph around the curve. my bike would have been ok, but it hit the post of the guard rail, totalling the front end. oh well... at least i walked away with a few scratches and a bruised knee. :D
 

Attachments

  • IMG_3935.jpg
    IMG_3935.jpg
    95.1 KB · Views: 122
  • IMG_3987.jpg
    IMG_3987.jpg
    92.5 KB · Views: 120
went down about a month ago, hit soft dirt going 30mph around the curve. my bike would have been ok, but it hit the post of the guard rail, totalling the front end. oh well... at least i walked away with a few scratches and a bruised knee. :D

OUCH! :eek:

Glad you are ok though :)
 
so does this give you the perfect reason to get pazzo levers?


It's been awhile since I looked at this thread but you are right, I have the Pazzo shorty levers now. I did replace the bent one with a stock lever at first for just 18 bucks but then could not resist getting the Pazzos.
 

Went down once...so far...my own stupidity:eek:...cut through grass and hit a sink whole:cool:...$16 to unbend the bent shifter...
 


Back
Top