J
justBlue
all I ever got was a NO from everybody, everthing or products did not work. Living with itwhatever happened when you went to see a "professional" did I miss that?
Thanks!
Mike
all I ever got was a NO from everybody, everthing or products did not work. Living with itwhatever happened when you went to see a "professional" did I miss that?
even nothing from a body shop? i find that hard to believe. Keep your eye open on ebay or something for a tank, they appear every once in a while.all I ever got was a NO from everybody, everthing or products did not work. Living with it
Thanks!
Mike
Since its so close to the seat, just tell everyone that its a footprint from when you stunt Bert is offering his photoshop skills if you need to make some proof lolall I ever got was a NO from everybody, everthing or products did not work. Living with it
Thanks!
Mike
It looks like a baseball dent to me. :don'tknow:Looks cool! but I have custom paint going across tank.
I did find this weekend a baseball bat about three feet away from my bike.....hmmmm
Well the glue gun kit that came with this things garbage, it stopped getting hot then the trigger broke, double malfuntion.But after getting a better hot glue gun the puller bar started working.It took me around 10 attempts total, 5-7 with the crap glue gune then after replacing it I only needed 3 attempts.The glue flowed faster out of the new gun, so I was able to glue to the tank faster before the glue cooled.
Here's the before pic of my dent
The dent puller glued onto the tank
Heres one after the majority of the dent was pulled out, there's still one small indention left toward the bottom but I ran out of hot glue sticks for now.
I'm sure I won't have any problem removing the last few flaws now that its mostly fixed.I doubt this will work for the OP's dent but I just wanted to share in case anyone else has a shallow dent like I had.
Sent from my BNTV600 using Tapatalk
I'm a little confused at how it happened.I know it had to of been a pressure problem, that's obvious.But I carefully checked my hoses, I blew air through them before anything and I could hear air whistle with the gas cap open.I looked for a pinched line with a flashlight before I lifted the tank as well.I haven't seen any evidence of a pinched line, but I'm guessing when I was modding over the winer I had them pinched temporarily.Heck I took my bike apart 5 or 6 times this winter, I'm sure it was pinched.Its just hard to believe I've ridden at least a month without noticing lol.god stuff Craig! thanks for sharing your success. how did you get that dent if I may ask?
That is exacly what happened to me - I think it sucked itself in - same spot as pictureIt happened to me now, I just noticed it today before I left work. I pulled off the side cover so I could shine a light under the tank to double check that my hoses aren't kinked at all.Id admit it if they were, but they aren't.Everythings nice and straight connecting to my tank and I can move the slack with ease so nothings pinched.I'll take a picture soon, I was trying to ignore it today so it didn't bother me quite as much.
Mines a little different then the op, the area my knee presses against on the right side shifted in, the entire area..It almost looks like I pressed in my tank further using my knee to shift my body weight, I doubt that's what happened its just the best way to describe it.
That is exacly what happened to me - I think it sucked itself in - same spot as picture
Have you gotten it out yett?I was thinking about buying a 2nd dent puller kit so I could double my pulling power, or alternate pressure between them to kind of rock the dent free.But luckily mine finally popped free with one puller tool attachedThat is exacly what happened to me - I think it sucked itself in - same spot as picture
It actually wasn't a suction cup, I just called it that because the plastic piece you glue into the dent kind of resembles one, it comes with a smaller one shaped like a football as well.You'll be able to get it to fit, just use tons of hot glue.I was amazed how easily the hot glue peeled off.No -I haven't got mine out yet - not sure if the two side suction cups are going to hit flat to get good pressure so the middle one can pull out.... But it work for u thats great. Did you use a different glue or glue gun then that came with the kit?
ThankS!
OK - Thanks! that aproach sounds better - pulling at the sides first instead of going to the deepest part of the dent. Where did you end up getting a better hot glue gun? Never had a reason to use one before.
I sure do apperiate the time and effort you have helped me and others on the Forum
Can you look at mine - see if that dent puller would work at that angle?
link to my dent in tank:
http://copgisweb.ci.pearland.tx.us/web/img_0086.jpg