Mod Suggestions


person4l

New Member
Hey all, I recently picked up a 2014 FZ6R is Rapid Red. I’m looking for suggestions on mods to do to it. I’m looking for more appearance and sounds mods than anything but all is welcome. So far it’s got: shorty CRG levers, led flush front signals, a fender eliminatior with integrated sequential led brake/turn signal. I was looking at making the jewel a light as well but I’m unsure how to go about that.
 

Attachments

Appearance and sound mods I did include Luimoto seat cover, Puig rear mudguard, and Leo Vince underbody exhaust. That exhaust looks great and sounds even better.
 

person4l

New Member
Did you go with the full exhaust system or just a slip on? I’ve currently got a Leo Vince Underbody Evo II slip on and I think it sounds great but I wish it was louder. Just don’t have $600 for a full system and another $300 for a power commander
 
I went with the full system. Took a while to save up and even longer to talk my wife into letting me do it. :)

Tried it with and without the DB killer...easy decision for me to run without, because I wanted it louder too. I'm very happy with it.
 

2014fz6r

New Member
I made the jewel thing into a light because to me it seemed odd to have it there and be useless. So basically all I did was remove the headlight housing from the bike then drilled if I remember right it was a 9/16" hole in the middle of it and added a T10 bulb socket I got off amazon and siliconed it in place. I'm sure someones done it way cleaner then me but it works so I'm happy. Also when you drill the hole you'll get the shavings inside the headlight so I used a peice of fuel line I had lying around and taped it to my shop vac and cleaned it out. Then I took a 12v switched power from the front turn signals mostly because its right near the front and comes on when you start the bike same with everything else. I don't have any pics of it right now but if you like I can take some and I can try and find the link for the sockets. Hope that helps
 

Cfz6r12X

New Member
I made the jewel thing into a light because to me it seemed odd to have it there and be useless. So basically all I did was remove the headlight housing from the bike then drilled if I remember right it was a 9/16" hole in the middle of it and added a T10 bulb socket I got off amazon and siliconed it in place. I'm sure someones done it way cleaner then me but it works so I'm happy. Also when you drill the hole you'll get the shavings inside the headlight so I used a peice of fuel line I had lying around and taped it to my shop vac and cleaned it out. Then I took a 12v switched power from the front turn signals mostly because its right near the front and comes on when you start the bike same with everything else. I don't have any pics of it right now but if you like I can take some and I can try and find the link for the sockets. Hope that helps
Hi yes can you take some pics and a link , I may like to try it after I see how it looks.
 



Top