Tachometer


Cjbike

New Member
Hey guys, can anyone please tell me if there should be volts on the yellow and blue wire running from the clock to ECU. Basically the yellow and blue wire should the be volts and if yes how much volts?

I am stuck with ER1 error and have replaced ECU, Ignition and wiring harness. I'm thinking it might be the meter. Also HI temp and oil light are flashing with HI temp.

At the moment i get the same volts on the yellow and blue wire as the amount of volts i connect to the red and white wire to power up the meter?
 


Top