Need Help Tachometer No Display


Xaviarrgh

New Member
My 2013 FZ6r recently has had the tachometer, speed, temp, fuel and odo go out. I jiggled the tach to ecu connector and it came back for about a week, but has reverted back (pic). The backlight works and other lights work, bike runs and starts fine, fuel pump primes on key turn, no other electrical issues.

IMG_1237_Trim_Moment(3).jpg

I’ve tried to do some research and all I can find is that one wire from the ecu to tach sends all the information that’s missing on my display, the blue/yellow. I checked the connector at the ecu and also at the tach to ecu, even used dielectric grease on the male prong.

Im barely mechanically inclined, and even less so electrically. If anyone could offer any tips before I pull the tach and take it apart to check, it would be very appreciated. Thank you!
 

Rumpig

Member
Try testing that wire for continuity from end to end with a multimeter , there could be a break in it. Could also be a bad earth wire.
Otherwise i'm all out of ideas.
 


Top