NOOB question

[FZ6R_Blue]

So I'm not very good with electrical setups.

with my LED's,Battery tender and PCV my Battery is getting over crowded. anyone have some ideas for me... I just have to much stuff hooked up to the terminals and i would like to clean it up

 

[Sparkxx1]

I think I've posted this before. This is what I would do...

.: Distribution Block / Powered Relay | Canyon Chasers Motorcycle Sport Touring :.

 

[FZ6R_Blue]

Do you have one on yours?
if so where did you get your block/relay

 

[Nastybutler]

Another option is a terminal strip. You can connect as many devices as you want, depending on what size strip you get. The strip connects to a relay connected to the battery, and grounded to the frame.

 

[rjohnson5481]

Or buy a kit from eastern beaver

Fuse Panel Wiring, Fuse Panel Kits for Motorcycles, cheap Worldwide Shipping

Just received (today's mail!) their H4 fairing mount relay kit to put in a 85/80 headlight bulb. Nice stuff, shipped from Japan. An alternative to the eastern beaver fuse block is the fuzeblocks fz-1 which has an integrated relay for a bit cleaner install.

FUZEBLOCKS.COM

Bob

Great find bob, Was looking for something like that.

 

[yfz6r]

Distribution block would be easiest and cheapest. Connect all your wires nice and tight then electrical tape over the thing Just in case. Will make it easy to add stuff in the future. Great suggestion, sparx

Something like this is all you need man!
One 4 GA to Four 8 GA Power Ground Distribution Block | eBay