• Welcome to the Yamaha FZ6R Forums. Member registration disables ads and allows you to post and share. Register Here.

Most Mods in a week?

CtrlAltDl

New Member
Joined
Aug 20, 2010
Messages
427
Location
Everett, WA
Visit site
1. HID 6000K.
2. Installed Garage Door Opener with button below gauges and wired to bike battery.
3. Added Cigarette Lighter jack
4. Reflective Wheel Stripes
5. Handlebar Mirrors (didn't like 'em, so I removed them)
6. Integrated signal/tail LED light
7. Made my own Fender Eliminator
8. Vista Throttle Lock
9. Cramp Buster

...and it's only Wednesday.
 
You have been busy!! If you are out of mods, I have plenty of things to do around the house so I can go riding!!!! lol
 
How hard was the HID, and the garage door opener?

Is it better to do all the same wiring mods at the same time so you dont have to remove all that crap over and over and just do it once?
 
1. HID 6000K.
2. Installed Garage Door Opener with button below gauges and wired to bike battery.
3. Added Cigarette Lighter jack
4. Reflective Wheel Stripes
5. Handlebar Mirrors (didn't like 'em, so I removed them)
6. Integrated signal/tail LED light
7. Made my own Fender Eliminator
8. Vista Throttle Lock
9. Cramp Buster

...and it's only Wednesday.

How about the most mods.....period....

Intuitive no-cut sliders
R6 foot pegs
Pro-Grip CF tank protector
ProGrip gas cap accent
carbon turn signal pods
Fender Eliminator
Back-Off Brake Light Modulator
R6 carbon mirrors
K&N air
K&N oil filter
Stebel 80 Magnum horn
Gorilla 7017 alarm
Diversion shorty levers
RaceTech springs F&R w/20mm sag
Driven D3 alloy grips
Spiegler SS brake lines F&R
40-UV (black light) LEDs
DDM Tuning 6000K HID Kit
EBC sintered F/R brakes
Metzler Sportec M5 Interact tires F/R
Power Commander V
R6 headers
Viper micro can
Roth backoff plates
NGK Iridium plugs
12V DC power outlet
Puig rear hugger
Removed the front fork side markers
Cramp Buster
Integrated Walkie Talkie with push to talk on bars
1.5mm fork lowering
Gas cap Cam/GPS mount


I still have the stock windscreen.....;)
 
How about the most mods.....period....

Intuitive no-cut sliders
R6 foot pegs
Pro-Grip CF tank protector
ProGrip gas cap accent
carbon turn signal pods
Fender Eliminator
Back-Off Brake Light Modulator
R6 carbon mirrors
K&N air
K&N oil filter
Stebel 80 Magnum horn
Gorilla 7017 alarm
Diversion shorty levers
RaceTech springs F&R w/20mm sag
Driven D3 alloy grips
Spiegler SS brake lines F&R
40-UV (black light) LEDs
DDM Tuning 6000K HID Kit
EBC sintered F/R brakes
Metzler Sportec M5 Interact tires F/R
Power Commander V
R6 headers
Viper micro can
Roth backoff plates
NGK Iridium plugs
12V DC power outlet
Puig rear hugger
Removed the front fork side markers
Cramp Buster
Integrated Walkie Talkie with push to talk on bars
1.5mm fork lowering
Gas cap Cam/GPS mount


I still have the stock windscreen.....;)

Uh, I take it that doesn't all fit in your signature!
:rof:
 
Uh, I take it that doesn't all fit in your signature!
:rof:

LOL......true words my friend....I ran out of space a long time ago.
 
3?
Diluted, jspansel and me? Or did the previous round top that Robert?

(get it, "most mods in a week"... ha, I kill myself... ah, I am showing my age, here kitty kitty...
alf.gif
)
:rof:
:rof:
:rof:

Oh, bike mods.... :D

You will all always have more than me.... I'm more a buy-it ride-it person... a few mods here and there... not much on the looks, 'cause stock looks pretty good to me... but things to make the ride more enjoyable and help me not get too lost are where my focus is.

O.K., not to be too technical, but if you're calling:
"1.5mm fork lowering
K&N air
K&N oil filter
Metzler Sportec M5 Interact tires F/R
NGK Iridium plugs
Removed the front fork side markers
EBC sintered F/R brakes"

these "mods"... then I've done a few like that:p I personally don't consider upgrading parts "mods", but good to know:)

OK...OK.....mods and upgrades combined...anything that ain't stock....
 
Wait a sec... 1.5mm fork lowering? Is the difference noticeable? I dropped mine 12mm and it's *just* perfect now, for turn in.
 
Wait a sec... 1.5mm fork lowering? Is the difference noticeable? I dropped mine 12mm and it's *just* perfect now, for turn in.

I guess it depends on how much you weigh and I have the Racetech springs and 15w fork oil.
 
Is this thread like a "my pee pee is bigger than your pee pee" contest? Or maybe "my dad is stronger than your dad" statement?

Kidding, kidding... :D :D
 
Is this thread like a "my pee pee is bigger than your pee pee" contest? Or maybe "my dad is stronger than your dad" statement?

Kidding, kidding... :D :D

Hmmm..I think I'd lose that one.....;)
 
Back
Top