ClickClick5
New Member
Does anyone know what the individual segments are for the bike's diagnostic mode? I know that d01 is the TPS, but what are the others? And the error codes that can be produced? Are they the same as the R6?
Thanks.
*And just to help, Yamaha uses the same method of entering the diag mode on most of their machines:
1) Hold down the "Select" and "Reset" buttons.
2) Turn the key from "Off" to "On".
3) Keep the two buttons pressed, the temp display will blink.
4) "d01" should now be the only thing on the screen.
5) Let off the two buttons and then hold them both down again for 5 sec.
6) You are now in Yamaha's readout cluster diagnostic mode.
Thanks.
*And just to help, Yamaha uses the same method of entering the diag mode on most of their machines:
1) Hold down the "Select" and "Reset" buttons.
2) Turn the key from "Off" to "On".
3) Keep the two buttons pressed, the temp display will blink.
4) "d01" should now be the only thing on the screen.
5) Let off the two buttons and then hold them both down again for 5 sec.
6) You are now in Yamaha's readout cluster diagnostic mode.