bloodypulp
New Member
Cleaned my chain and lubed cleaned bike and went for a long ride cut off three times in 45 mins and my exhaust is loud as it can be people just don't look or care about bikes around them. They think u have no rights F.
-
Welcome to the Yamaha FZ6R Forums. Member registration disables ads and allows you to post and share. Register Here.
What did you do to your bike today?
- Thread starter Diluted
- Start date
EsrTek
New Member
Cleaned and lubed chain and then adjusted the chain (my first time ever).
Not 100% sure both sides are 'perfectly' lined up but it looks close. Quick ride on it seemed fine and it turned good, but it was all >20mph.
Not sure, but I might redo it.. I loosened it up all wrong before i figured how to tighten it....
Not 100% sure both sides are 'perfectly' lined up but it looks close. Quick ride on it seemed fine and it turned good, but it was all >20mph.
Not sure, but I might redo it.. I loosened it up all wrong before i figured how to tighten it....
Cleaned the crap out of my bike! And my vette
Showed my new friend max how to clean and live his chain then we went for a ride took some footage it was fun!
Sent from my one and only iPhone 5 using Tapa 2 da talk
I'm suprised you haven't started painting red monster logos all over your buddies bike lol.Have you had a chance to ride the stock bike to compare to yours?
Put my new 9 led flexible light pods in the air scoops just a little bit ago. Looks great and now I don't need integrated mirrors to pass inspection. They were concerned about turn signal visibility from the front because I have flushmounts. Now I'm back to my Carbon Fiber ZX6R mirrors.
Attachments
Motomama
New Member
so I have 325 miles on my new baby. Did the first oil change and it wasn't easy getting the oil filter off. Got the Shotgun Frame sliders put on yesterday and my Corbin new seat made on Thursday. Wheww....weee! 
Waiting for my Puig touring windscreen, integrated taillight and flush mount turn signals to arrive next week.
California weather is beautiful....riding tomorrow.
Sent from my SPH-L710 using Tapatalk 2
Waiting for my Puig touring windscreen, integrated taillight and flush mount turn signals to arrive next week.
California weather is beautiful....riding tomorrow.
Sent from my SPH-L710 using Tapatalk 2
Those look really nice Scott!!
I dropped off my bike today to get the new tires put on, Brake lines front/rear changed out to Blue Speigler SS lines, Coolant flushed, 12k service minus oilchange. Should get it back next friday evening since they didnt have a tech in today.. Hopefully wx will get better and I can ride then.
Also almost dumped her today trying to get her off the ramp of the trailer.... found out that is always a 2 person job. Managed to save her by sacrificing my foot and shin to support her until someone was able to support the other side.
so I have 325 miles on my new baby. Did the first oil change and it wasn't easy getting the oil filter off. Got the Shotgun Frame sliders put on yesterday and my Corbin new seat made on Thursday. Wheww....weee!
Sent from my SPH-L710 using Tapatalk 2
Did you try using a cap type oil filter wrench? If get it slipped on to the correct spot on the filter it comes off super easy. Or just use the KN and dont worry about the cap in the future.
Motomama
New Member
Thank you Greg...lesson learned. KN oil filter next time. I ordered a few KN filters the for future.
Sent from my SPH-L710 using Tapatalk 2
Sent from my SPH-L710 using Tapatalk 2
No I haven't! I mentioned it but he kinda brushed it off so I'm not one to push. It is still his new toy so ill give him some time
Sent from my one and only iPhone 5 using Tapa 2 da talk
Got up to take a ride and somehow had a flat tire :/ it had no leaks (i checked it) but i decided it was time to put my new Bridgestone BT023's. the old ones did pretty good. had 15,000 miles on them. i gotta say i love new rubba!
Motomoma and Scott looking good guys. Scott w your consent I will do the same LED's in my scoops
Sent from my one and only iPhone 5 using Tapa 2 da talk
Sent from my one and only iPhone 5 using Tapa 2 da talk
Awe shucks,
I'd be honored. The link is in my Light Pod thread. They came from Cali so it's a short trip to your house. They look better in person. They're much brighter than I thought they'd be.Awe shucks,
They look sweet! Me and Ron are planning some major LED mods soon
Sent from my one and only iPhone 5 using Tapa 2 da talk
BoneJj
Well-Known Member
So I installed a battery tender adapter to my battery the other day, and of course to do so I have to take the front seat off. Which is all fine and everything but I don't get why I can't just have a key related latch to just undo the front seat as well... just a little mini rant there...
But yeah, so I hooked the wire up straight to the battery and fed the cable through the holes in the tail of the bike and it now sits just under the rear seat.
I'm going to order up a few other connectors though to be able to plug in a USB cord under the rear seat to allow me to charge while I ride.
But yeah, so I hooked the wire up straight to the battery and fed the cable through the holes in the tail of the bike and it now sits just under the rear seat.
I'm going to order up a few other connectors though to be able to plug in a USB cord under the rear seat to allow me to charge while I ride.
Little Miss Dangerous
New Member
Started longingly at it and wished my parts would arrive!!
hahaha every time I read that I think of this guy Ron as some big burly woodsman planning an LED mod for his crotch rocket. i think i'm gonna be the only one that finds this funny
Weslowski
New Member
Hid projector retro fit
Yesterday I installed a projector and I noticed the projector was rotated clockwise before I had a bulb and didn't notice it. My question is that is there a way to rotate it back to level. I tarted adjusting up and down left and right but got nothing out of that. Can anyone help me!
Yesterday I installed a projector and I noticed the projector was rotated clockwise before I had a bulb and didn't notice it. My question is that is there a way to rotate it back to level. I tarted adjusting up and down left and right but got nothing out of that. Can anyone help me!
