XJ6 2010 crankcase cover

[twisted89]

So I recently dropped my bike on a corner and I need to replace the crankcase cover but I'm having trouble finding any decent information on it (I've looked through the service manual).

From what I can tell I just need to drain all the engine oil, take all the bolts out and switch it with the new one? The only thing that concerns me is I can see threaded holes on the inside of the new cover, do I need to remove anything else first or is it safe to pull out whatever is attached to the cover?

Any help would be greatly appreciated!

Edit: Posted in the wrong sub forum, could someone move this to technical? Thanks.

 

[Bert-Aus]

Double check the part numbers against each other
If they match you should be all good to go
-I don't know for certain but if there was nothing attached internally when you removed your original casing...

 

[twisted89]

The parts are exactly the same, that's not a problem. I haven't removed the current cover yet, I wanted to know if I would break anything before pulling it off.

 

[Bert-Aus]

Google the parts catalogue
the exploded axo drawings show how/ where things go (not order of assembly though)
that may assist you further