REmapped

[Ravinx]

Okay so I remapped to sport revB. Was great for about 300 mi or so. Now when I start the bike it runs super rich on warm up. Like make my eyes burn. I was at bike night and people around me were like DAMMM. Is there any reason why this would happen all of a sudden? I mean I like the 3 foot fireballs and all. just want to know why the bike would start running rich on start up. My previous map was 2 brothers with stock filter. I have full 2 brothers with 4db tip and K&N filter.

 

[Scott_Thomas]

Okay so I remapped to sport revB. Was great for about 300 mi or so. Now when I start the bike it runs super rich on warm up. Like make my eyes burn. I was at bike night and people around me were like DAMMM. Is there any reason why this would happen all of a sudden? I mean I like the 3 foot fireballs and all. just want to know why the bike would start running rich on start up. My previous map was 2 brothers with stock filter. I have full 2 brothers with 4db tip and K&N filter.

I run adv gear rev b and never have had a problem like that. Maybe a glitch with your JBP or PCV. Marthy would be the one to answer that best.

 

[Ravinx]

MARTHY WHERE YA ATTTTT.
I need an adult!:facepalm:
I need an adult!:facepalm:​

 

[Scott_Thomas]

MARTHY WHERE YA ATTTTT.
I need an adult!:facepalm:
I need an adult!:facepalm:​

Have you checked your pcv/jbp for firmware update? Maybe try updating and flashing back to stock map and then flashing back to sport rev a.

 

[Scott_Thomas]

Okay so I remapped to sport revB. Was great for about 300 mi or so. Now when I start the bike it runs super rich on warm up. Like make my eyes burn. I was at bike night and people around me were like DAMMM. Is there any reason why this would happen all of a sudden? I mean I like the 3 foot fireballs and all. just want to know why the bike would start running rich on start up. My previous map was 2 brothers with stock filter. I have full 2 brothers with 4db tip and K&N filter.

Actually your problem may be because you're running sport rev b. sport rev a is the recommended map for TBR exhaust with JBP.

 

[Ravinx]

oh! well now. ill try thAT

 

[Marthy]

Whassssap! Running the DBK... might be why. Go on my website, the new 'massage" version of RevA us there. If it doesn't help load the TB map with the dBK.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[Ravinx]

whats dbk I dont understand
Ok downloaded new map off of your site. I will remap after work tomorrow

 

[Marthy]

You use the DBKiller? Restriction = need less fuel.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[Ravinx]

You use the DBKiller? Restriction = need less fuel.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

I dont know. I bought the bike with the system already installed. where will I find it?

 

[abyss1406]

the DB killer will be inside the outlet of the exhaust and itll look like this Two Brothers Racing, add an item to your shopping cart: M2/M5/M7 P1X Race Pipe PowerTip (-7 to 8 dB) 005-P1X.

 

[Ravinx]

Ooh ha, yeah has the 4db tip
Ok so remapped richness went away. Now it backfires and throwing some mean fireballs on engine breaking

 

[Marthy]

That with the RevA map?

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[Scott_Thomas]

Great balls of fire! Love the pop on decel.

 

[Marthy]

That with the RevA map? I will assume you have the block off plates install but double check on the top of the valve cover. Do you see any hoses comming up? (3/8" dia. X 2) or you can see 2 flat plates?

Sent from my SAMSUNG-SGH-I337 using Tapatalk

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[Ricenoodle]

Definately run the new Rev A, Marthy is the man.

 

[MistahT]

Think I always ran Rev B, I'll have to try A.

Is your speed sensor wire hooked up? Someone I know was having issues and found out his wire popped off.

 

[Scott_Thomas]

Think I always ran Rev B, I'll have to try A.

Is your speed sensor wire hooked up? Someone I know was having issues and found out his wire popped off.

He's running sport map which doesn't have individual gearing like advanced gear maps which require speed sensor hook up. AdvGear maps have 1/2 sport and 1/2 touring.

 

[Ravinx]

I will have to check on the plates. I do have 1 hosecomming into the box that I know of. My bike is cali legal.

 

[Ravinx]

Also does anyone have pics of the plates so I know what im looking for? Speed sensor hookup too. There is a wire running off of the pc5. Though I thing it 7s a ground and not speed sensor.