I'm compiling a small order of various parts and am having trouble finding the part # to a bolt. I used Yamaha's part catalog to identify all the other parts: My Yamaha Prompt - Parts Catalog . Attached is the picture of the remaining original button head bolt. The two hex bolts are the ones I am replacing, right above the brake foot lever.
Any help would be appreciated. Thank you
the bike originally came with the button head bolts. i stripped one of the heads when i installed my CS a few months ago. it's bugged me (just a tiny bit) ever since i put those hex ones on and since i am ordering a few other parts i figured i'd get the one bolt i needed so i could have them match all the other button head bolts around them.
Looking at that pic it is really hard to make out. Looks like it is the right (brake) side of the bike because of the drain hoses. But the Kickstand spring is on the Left side I thought? If I am right on this, I have no idea what that bracket is on the bike that those bolts are in. I think the part I listed was actually for the bolts that hold that large Footpeg assembly on after closer inspection.I'm compiling a small order of various parts and am having trouble finding the part # to a bolt. I used Yamaha's part catalog to identify all the other parts: My Yamaha Prompt - Parts Catalog . Attached is the picture of the remaining original button head bolt. The two hex bolts are the ones I am replacing, right above the brake foot lever.
Any help would be appreciated. Thank you
were you using the yamaha parts catalog link i put in the first post? if so which section of the bike were you looking at?
just going by part # 60 i couldn't find anything on that link. all the part #s were long #s
it is the brake side. that kick stand spring is from the CS i installed. that bracket is from the CS installation, however those bolts are factory bolts that still help hold the frame together even if that bracket isn't there.
Part #37 on this diagram:
I tried but was unable to verify if one of those numbers cross referenced with the yamaha part # as bike bandit didn't have that info, i'll call them tomorrow and see if they can't verify the info. i hope it's one of those 2...
...however i was able to confirm after double checking the diagram with my bike that it indeed was #37 on that diagram. unfortunately partzilla whom i was gathering my order with nor bike bandit nor yamahapartshouse has it. i'll do some searching. i'm sure i'll find it somewhere.
I don't have a bike in front of me right now, and it's not clear from that diagram exactly what it's holding in place. Does it have a purpose other than being an anchor bolt for the centerstand that isn't officially available in this country? That might be why nobody stocks it. Can anybody with a bike in front of them confirm?
on yamaha's parts list it's called a bracket adaptor 2. i just looked and it sits inbetween the large footpeg bracket and the frame. there's one other very large bolt that goes through it connecting to the frame. all the bolts that are connected to it just go straight through to the frame so it seems like it's just a place holder with the added use of connecting a CS to. like you said Mike, that may be why no one seems to carry the bolts. still seems odd though since they came factory installed, figured places would carry the bolts for that reason alone. hopefully when i call bikebandit tomorrow they'll be able to confirm that one of the part #s Blue posted will be the bolt I'm looking for. If not, then no big deal. the hex bolts still blend in fairly well.