Front fairing popped off a bit

[Mr Citrus]

So I was about to wash my bike, and noticed a piece of the front fairing slightly popped out of place. What are the steps to pop it back in?

 

[Rabbitman109]

You're most likely not going to like this response...Take off the fairing, and there will be a screw on the front of that scoop. After you take the screw out, that is free, and if it were me, I would take it out, and put it back in. I believe there are 3 places that it snaps in. I believe that they are little pegs that sit in holes. Once you do that, put the screw back in. It really is simple and you will figure it out once you get the fairing off. Let me see if I can find a picture of it.

 

[Rabbitman109]

Here you can see two of the pins in the upper center and center right of the picture:

You can see where the screw goes in the lower right portion where it is black:

 

[Mr Citrus]

All resolved, thank you!
EDIT: An sorry about the picture size I posted from my phone originally, and just sat at my desktop