Does an R6 front sprocket fit our bike?

[Lilday]

I'm seriously struggling to find a nice front sprocket for the XJ6N (FZ6R same bike).

I've found this:

That is the XJ6 sizes.

So could I buy a Renthal sprocket to fit an R6 and it'd fit the XJ6?

**EDIT**

It appears that it does.

Here is the R6 page:
http://www.jtsprockets.com/catalogue/model/2499

BUT that is for a 525 chain!

our bike uses a 520 chain so you need the sprocket from their 520 conversion kit:
http://www.jtsprockets.com/catalogue/model/2499

Am I right?

 

[yellowfz]

Like I said before the splines match and the thickness is so close it wont matter.
The sprocket I have package says it will also fit a FZ1 09-10, so there is something else to look at.
Worse case is you would have to double stack the locking washer (fits over the splines and is bent up to lock the sprocket nut), if I remember right the nut has a offset in it that will allow a few thousands difference.
Chains have enough side to side slack that a few thousands wont matter either, and will still track straight.