after much debate i pretty much decided to order the pcv over the juice box pro but kinda want the juice box pro more for switching maps on the fly anyways yes i searched before but only thing with the pcv is the plugging in the speed sensor dont wanna mess anything upany one have advice
another pcv thread
- Thread starter jlente89
- Start date
Super easy! You will get all the instruction with the PCV. You can also add the map switch for about $40.00 to switch between 2 maps. The speed sensor is just a simple 22G wire that goes from the PCV to the speed sensor on the gearbox. An additional 5 minutes...
the $40 switch can be made for about $5 with any on/off type switch at the hardware store fyi. two pieces of wire into the correct spots on the pcv, connect the switch, load proper tune(s), and open vs. closed circuit switches tunes. I know this because there was no way I was paying that much for the switches I found made just for this purpose.
....have any pics of your custom switch?No pics, but maybe I can make it easier.... There are lots of wholes on the pcv. Find the ones for a 12v switch and put any ebay or autozone toggle switch in those holes with some scrap wire. If you hooked up a speed sensor, same thing but with 2 or 3 wires instead of 1. Now you just need to load maps.