Weatherproof switches for (1) aux LEDs and (2) PCV fuel map?

[Pointman1776]

Anyone have recommendations for weatherproof switches for the following?

1. aux LED lighting system (three separate LED circuits) - I'm planning on placing the three switches either on the black plastic trim piece by the instrument cluster or on the underside of the frame below the seat on the left side. (Space permitting, I might get four switches: one "master" that turns all three on in addition to the three separate circuit switches).
2. PCV fuel map (to switch between Touring Rev B and Sport Rev B) - I'd like this switch mounted on the handlebars on the left side.

I'd also like to get a main lead line and splitter for the pos and neg so I don't have four or five leads trying to connect to the battery.

In my internet search this weekend I've found a lot of switches, but not too many that were weatherproof AND compact.

Thanks in advance for your recommendations!

 

[Marthy]

Any good marine store will have proper waterproof switches with the rubber booth. That's what I use in the plastic under the gauges, work great. If you wire a bunch of stuff on one switch I will suggest you to use a relay.

 

[MNGreg]

I'd also like to get a main lead line and splitter for the pos and neg so I don't have four or five leads trying to connect to the battery.

In my internet search this weekend I've found a lot of switches, but not too many that were weatherproof AND compact.

Thanks in advance for your recommendations!

For this project, check this out (if you haven't already). Works good. Just unfortunate that many jumpers have bigger connections than fit on these panels.

Motorcycle Power Relay and Distribution Block | Canyon Chasers Motorcycle Sport Touring

For the waterproof boot, I agree w/ Marthy.