Search results

Glad you sold the bike, it was a beauty! ;))

Let us know how it goes, and the results of your clean up and paint job. Good luck!

A beautiful ride, great choice of 'farkle'. :)) Saw you upped your starting price on Ebay? Best of luck with the sale!

Don't forget to get the screws and pop in rivets to mount the piece as well. There is a 'right side' and 'left side' part, mirror images. Maddening to get the screws into the captured nuts, but it happens eventually. :) There has been one of each side on ebay for a very low price, not sure if...

Considering that the original was over $200, and required removing hardware from the rear seat to be usable, $100 would be.. very inexpensive. ;)

That site says it has been 'sold out' for some time. :) I also found that one, as well as others with the 'genuine Yamaha Part number' which most sites claim is unavailable. There were a couple of sites that actually had images of the top and bottom views, so you can see where the hardware from...

https://www.motosport.com/gytr-seat-cowl?mmy=yamaha;fz6r;2009&mmy_source=pdp&variant[GYT0001]=GYT0001-X006-Y023 Just found this on line. Not sure if still available, but this looks like the actual Yamaha Blue part.

https://www.ebay.com/itm/2017-Yamaha-FZ6r/333930167425?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

Yes, but would you BUY one? If a guy is going to take the trouble and time to do a good design, would you pay for it? That might help make the decision... :) If he does a working prototype, he could do a production run, if there were demand, so you would get a finished quality product... Worth...

Many (on this forum) may be grateful. :)) Have a good weekend.

Understood. :)

You might start by 'copying the seat'? From what I read, you need to use the hardware 'from the set' to mount the things, and they cost over $200 for a piece of molded plastic. It seems enough people are interested that if you work out a good design, people might buy them from you. :) I thought...

Venom Triple Tree 'attachment' That attaches to your Front stand, rather than the fork lifting parts. I cannot remember the diameter of the triple tree, so check that out before ordering. They sell two versions, the same stand, but with a differing range of 'adapters' to fit Triple trees. I will...

I understand. I use a front triple tree stand, from venom which doubles as a front stand that hooks under the suspension as well. I do know guys who have suspended the front to the garage roof with straps, or use a jack stand with a board on top under the engine, after removing fairings... not...

You might measure the amount of fork through the top triple clamp, to see if they are identical. I think if one moved 'up' when the forks were twisted, it would throw off your alignment. If you have a way to support the frame while you do it, it might pay to loosen the top triple clam as well...

Windscreen arrived safely, well packed! Thank you. :)

Any year 'grab rail' from an FZ6R should fit an FZR, as they don't appear to have changed. You can look up the part numbers and check that they are the same as your year bike, on almost any OEM part supplier page. They have very good parts diagrams for Yamaha bikes. ;)

Thank you. Interested, if shipping to Flourtown, PA, 19031 is not too crazy. :) Let me know if you can get an estimate please. Looks good! Thank you, Jerry

Interested in puig screen, if you could post some clearer pics of it.. Can't tell if it is scratched or just spots on garage floor? :) Thank you, Jerry