Marthy's PCV Maps


No gear position

It appears the speed sensor is working, when I unplug from the PCV it the speed is no longer displaying when running the Dynojet software. One thing I did notice was my gear position never changes from 0 regardless of what gear I'm in. I think that might have to do with the issue I'm having. I looked at gear calibration but I'm not sure how to properly set it up and the instructions are very vague. Has anyone had an issue like this or know what I need to do to set the gears?

Thanks

Nick
 
Been ages!
 
Looks like the gear calibration needed to be done. Once all gears were set I took it for a test ride and what a difference. Thanks Marthy!
 
Getting ready to install my PCV and I hope I have picked the right map. I was going with Advgear RevB. I have a TB full exhaust with block off plates but no air box mod. I do have the speed sensor wire already hooked into the pink wire coming up from the shifter side. So please could someone let me know if this is right? Still waiting for the mail to get here that has my PCV. So I have some time to correct anything that may be wrong.
 
Last edited:
MistahT said:
Sounds right. Airbox mod isn't required.
Click to expand...


Yup, not required, but easy mod to do while you're in there. The howl from the intake sounds awesome now with the FZ6 cams.
 
peculiarfish0 said:
I don't seem to have the Acc pump on my PCV ..?

They have a download on their site but only for PCIII

Can I get it on my PCV?
Click to expand...
It's part of the software. I don't remember offhand which menu it was under. If I get a chance between doing my discrete math homework I'll look. Oh, I hate this class.
 
ksk operator 1 said:
so scott, which map are you running right now?
Click to expand...
I have fz6 cams so I have a map tailored for them and some other mods. Prior to the new cams I loved the adv gear Rev b.
 
Where are the maps? The links in the first post don't work. I wanted the touring revD map for fuel economy with my tbr and pcv.
 
xtina said:
Where are the maps? The links in the first post don't work. I wanted the touring revD map for fuel economy with my tbr and pcv.
Click to expand...


You'll have to see if Marthy has it or someone else. I don't see it listed on his website for some reason.
 
Look at the Advgear map and copy&paste the map of 6th gear into a single map... that should be fine.
 
So I downloaded the viper can sport/touring map. But my bike keeps dieing whenever I pull in the clutch and bring it to a 1k idle. Any ideas? I have a custom m4 exhaust on my FZ6r (the slip on for r6) and KN filter.

:zombie:
 
Zinx said:
So I downloaded the viper can sport/touring map. But my bike keeps dieing whenever I pull in the clutch and bring it to a 1k idle. Any ideas? I have a custom m4 exhaust on my FZ6r (the slip on for r6) and KN filter.

:zombie:
Click to expand...

Speed sensor connected? Idle should be set at 1300 RPM when hot. I would double check the TPS setting (throttle position calibration) in the PVC too just to be safe.
 
Marthy said:
You can't use the Advgear map with TBPro. But you can achieve the same result.

1. Sport RevA
2. Touring RevB or RevD

Since you can swap map on the fly...
Click to expand...

Hi Marthy been following this thread awhile and just wanted to ask, would i use the maps above for my setup as well?

1. R6 headers with Akrapovic Megaphone (which is pretty much straight through)
2. TB Pro Juice Box
3. O2 sensor installed
4. K&N filter
5. Running Aussie fuel 95 or 98
6. Half freeway riding and half city riding

Also are there new link locations for your maps as i can only find the ones on your website. I'd like to try out the Touring maps so if possible can you email them to me or post a new link.

Thanks
 

You can either use the Sport or Touring map, no Advgear map with the TBPro. Now on AU fuel... might run a bit rich. Try both maps and compare. Not sure 100% how the close loop work on the 6R but on the FZ09 the O2 sensor should keep the AFR within 14.7 So in your case you could use the Sport map and the O2 sensor will take care of the rest.

From US to AU fuel... try leanong 2-3% but best way would be a dyno run.
 
You must log in or register to reply here.

Similar threads

S
Question Looking for maps
Replies
5
Views
727
Duptto69
D
A
What pcv or tuner should I buy to run Martha’s tune
Replies
4
Views
321
AyeBeezyy
A
R
Maps for fz6r
Replies
9
Views
243
jjmaine
J
A
PCV Autotune trims only 100% throttle?
Replies
1
Views
164
Axehandle
A
V
Anyone have any PCFC maps for FZ6R(2009) available?
Replies
2
Views
548
volcklore
V

Back
Top