Cams fit right in! Get them new or on Ebay. The cam gear need to me machine... meaning the FZ6R gears need to fit the FZ6 cams. Simply need to open the bore 0.100" or so, I can remember the exact numbers. Won't hurt if you can slot the intake cam gear a bit to adjust the timing. You need to advance the cam 3 degree (0.008" per degree is a good number to start with. Intake lobe center is 102 degree, exhaust is 105 (stock). While you're in there, remove the crank trigger wheel and file 0.020" so you can advance he ignition timing too. (Turn clock wise)Hello all! I'm looking to buy some pre-machined FZ6 Cams to drop into my 6R. I will pay for the cams + whatever you'd like to charge for the service. PM me if you're interested!
I'm located in Northern California and can travel from Sacramento to Bay Area and anywhere in between!