bars


  1. L

    Looking for 7/8 diam off road handle bars

    I am looking for some handle bars for my CL rebuild i figured id check with anyone on here before going to the local dealer. Im not sure how long / wide the stock bars are but they are 7/8 diam. Thanks in advance.
  2. W

    Bars hitting the tank.

    Hello guys, this is my first post on this forum. I just got a 2009 fz6r in blue. My main concern for now is that the steering bars are hitting the gas tank when turned all the way, how do i fix it?
  3. T

    What the deal with clip-on handle bars?

    I see a lot of people swapping the stock handle bars for clip-ons. What's the deal with that? What's the motivation? Is there some advantage to it, or is it mainly a cosmetic kinda thing?
  4. G

    Wanted, stock Bars, and front turn signals!

    Looking for Bars and Front Signals, what do you have. Trying to put the bike back to stock, and cant find either of these in the garage,, Email me at [email protected], is best for quick reply
  5. V

    Handlebar swap help

    Hey i was just wondering if anyone could explain how I go about removing the controls off my stock bars. I was going to replace them with woodcraft clip ons but I'm not sure how I go about swapping the controls between bars. I know other threads have been made reviewing them. But none have gone...
  6. A

    FZ6R Woodcraft Clip-Ons 1.5 Inch Riser w/ Black and Silver Bars $100 Shipped

    FZ6R Woodcraft Clip-Ons 1.5 Inch Riser w/ Black & Silver Bars $80 Shipped I have Woodcraft clip-ons in great condition for the FZ6R for sale. Also included are a pair of black bars and silver bars. The risers are 1.5 inches. $80 and it is all yours. I spent $200 from Revzilla. Everything fits...
  7. J

    Clip ons

    Hello everybody, I want to get some clip on bars, does anybody know what kind to get or that will fit on my 2012 6r
  8. K

    Drag Bars.

    So I put some drag bars from bike master on my bike today. They seem to fit alright. a little lower than the OEM bars. The arent hitting any of the mirrors or fairings on the side where the steering lock takes place. So I will have to wait and see how they handle. I put on Block off plates today...
  9. K

    Handle bars, pegs

    DOES ANYONE HAVE ANY HANDLEBARS THEY ARE WILLING TO SELL? I AM ALSO LOOKING FOR SOME NEW PEGS> DON"T ASK :zombie:
  10. M

    new bike, need help with installing fairings

    Hey fellas, I just picked up a 2009 fz6r and the previous owner had it stripped naked, I have all the parts , brackets and plastic but I just can not figure out how to put them back together. Now few things I should mention. The stock bars are replaced with renthal bars, really comfy, I love...
  11. B

    some a$$hole tried to steal my bike

    apparently he was trying to break the steering lock and the handle bars slipped forward and the steel bent, so anyway I need new bars and a ignition since my key wont fit anymore (yay for uneeded upgrages I was going to wait on?) I want to order the renthal handlebars, but on the how to...
  12. M

    Aftermarket handlebars? (not clip ons)

    Does anyone have Rizoma or Renthal handlebars? I like the position of the stock bars, but I want to get some black ones. So does anyone know if the Rizoma or Renthal bars change the position? and the stock bars are 7/8" correct?
  13. M

    Danmoto 3D Clipons? Advice?

    Danmoto 3D Clipons - my experience Jump to page 3 for riding impressions and a look at final install Before everyone jumps down my throat "YES, I've searched and gone through every thread on here with clip ons, FZ1 bars, street fighter conversions, etc many times." Got some heated grips...
  14. K

    FZ6R Cafe Racer Conversion

    Been making changes to the FZ6R; thought Id start a thread and see what you guys think... First I made it naked, added a single round headlight, now clubman bars... http://www.600cc.org/forum/album.php albumid=847
  15. P

    FZ1 Bar install

    I finally got my bars in the mail. I got them from Ebay. They are FZ1 spec but are not stock FZ1 bars. I didnt want silver bars and these were a bit cheaper. They look and feel great. Installation was pretty straight forward. I started by removing the front brake lever, then loosening all...
  16. S

    Handlebars For An Old Guy

    Hey All! I am going to convert my FZ6R into a standard and wanted some of your excellent help in changing out my handlebars. Right now I have stock bars with 1" up and back risers from Twisted Throttle. They put me at a very slight forward lean. This will upset some of you :o, but I...
  17. P

    Stock FZ1 Handlebars on FZ6R

    I've seen people online replace their stock handlebars with FZ1 bars on their FZ6, but I can't find much helpful info on doing that to the FZ6R. My question is: Can you run stock FZ1 handlebars on the FZ6R, without needing to cut the bars so they don't run into the tank? I don't want to cut...
  18. J

    More aggressive look

    Want a more aggressive look for my bike. So I want to get new handlebars for a better position. Yeah I rotated my bars to me. Works. But still not as aggressive like other sport bikes. Know any aftermarket handlebars I can get that look with? Or what I can do to get that look. And yes I USED THE...

Top