Search results


  1. R

    FZ6R Overheating

    How's the radiator itself look ? Not full of dead bugs or the fins all bent ? Losing coolant is usually a sign of the head gasket leaking but it doesn't sound like the problem from what you descibe . The timing being off could be a cause , have a look at the spark plugs and see what they are like .
  2. R

    2009 FZ6R will start because of a big mistake by me. Please help kind internet strangers.

    If there was no other damage and you put a new timing wheel on , it should start . The timing wheel should only go on one way . Make sure there's no metal fragments around the timing sensor .
  3. R

    FZ6 throttle body & cams

    The FZ6 has a chunkier timing chain and gears so to fit the cams you need to use the FZ6R cam gears because the gear on the crank is different to . The FZ6R cam gears need to be machined to fit on the FZ6 cams and the holes need to be slotted so the timing can be set to 102/105 . The gears are...
  4. R

    Question Timing Rotor Specifications

    Can't give you the specs but here's a pic of the timing wheel . I can provide a copy of the bin file if that helps .
  5. R

    Listing of common torque specs for FZ6R

    Google "fz6rc pdf " to find a copy of the manual
  6. R

    FZ6 Cam Install Project

    You can get away with not slotting the gears but there will be a bit of a flat spot down low . The timing Marthy quotes works the best . Pulls from 4000 rpm to redline .
  7. R

    New member welcome thread

    That seat looks comfy . Pic of the damage ?
  8. R

    Headlights

    Pretty much every bike has auto headlights on , it's to try and stop Stevie Wonder running you over. A.K.A SIDSY
  9. R

    Need Help High idle 2012 fz6r

    Don't know why the idle changed but it won't be because of the exhaust change . There's an idle adjuster screw on the left side of the bike . Look between the frame and panels near the throttle body for a phillips heads screw.
  10. R

    Bike hesitate under 5k rpm

    Most likely needs the throttle bodies synced.
  11. R

    Need Help Neutral safety switch

    Not sure what your trying to do . It will start in gear if the the clutch lever is pulled in , but not if the stand is down , there's a switch on that to .
  12. R

    Should I get a retune / ECU flash?

    https://www.ebay.com/itm/165628303467?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ya8VnGfiSIG&sssrc=2349624&ssuid=vasydYHQSnC&var=&widget_ver=artemis&media=COPY...
  13. R

    Should I get a retune / ECU flash?

    https://www.600cc.org/threads/timing-change-do-it.33484/ Adding more timing is well worth doing , they pulled heaps out compared to the R6 and FZ6
  14. R

    Question My gears won't engage

    Front sprocket stripped it's spline? Rear sprocket lost its bolts? Busted clutch maybe?
  15. R

    Need help with cutting xj6 throttle plate

    Australia might be the only country that had the restrictor to comply with the learner approved power to weight restrictions. Go into diagnostic mode on the dash and see what your throttle reading goes up to. Restricted was 70%
  16. R

    Error Code 12

    Have you not seen my reply in your other thread? If you can push start it it's the starter relay, i know cause i had the same problem.
  17. R

    Code 12.

    https://www.ebay.com.au/itm/384395372100
  18. R

    Code 12.

    Try push starting it , if it runs then its the starter relay.
  19. R

    Need Help Camshaft

    You need to machine your FZ6r cam gears to fit the FZ6 cams. https://www.600cc.org/threads/fz6-cam-install-project.32137/ It changes the power band from pulling between 6500 - 10000rpm to being 4000rpm to 11000rpm
  20. R

    Need Help Can i de restrict by modification?

    you can just cut a bit of the factory throttle plate. Not all countries had the restricted version , where are you?

Top