Thanks Thanks:  1
Likes Likes:  1
Dislikes Dislikes:  0
Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: 2009 FZ6R Street Fighter Conversion

  1. #1
    Junior Member
    Join Date
    Nov 2013
    Location
    Brooklyn
    Posts
    10
    Rep Power
    0

    Default 2009 FZ6R Street Fighter Conversion

    Project completed.











    More pictures available in the gallery:

    http://www.600cc.org/forum/album.php?albumid=838

    Conversion:
    All 2009 XJ6 Plastics
    Belly Pan didn't fit correctly with the 2BR Exhaust, so it was trimmed to fit.
    FZ8 Headlight
    Original XJ6 Mirrors - If you do not have the stock brake perch, a Yamaha threaded right side 7/8" clamp is required.

    Exhaust:
    Two Brothers M2 Vale Black Series Exhaust
    P1X Silencer
    Driven Engine Block Off Plates

    Brakes:
    Accossato 19x18 Front Master Cylinder (with integrated reservoir and folding lever)
    Accossato Folding Clutch Lever
    Galfer Steel Braided Lines
    Single Banjo Brake Pressure Switch

    Lighting:
    MotoDynamics Rear Integrated Taillight
    Competition Werkes 23W Short Turn Signals (Same Front and Rear)
    Targa Turn Signal Yamaha Adapters for front
    Competition Werkes Fender Eliminator

    Gearing:
    Driven 520 +1 Lightened Front Sprocket (Front +1 is like having overdrive.)
    Driven 520 Stock Lightened Rear Sprocket

    Electronics:
    Power Commander V

    Security:
    Scorpio I900R Alarm
    Roadlok Integrated Front Disc Lock

    Suspension:
    Racetech Front Gold Valves
    Racetech Front Springs .90kg
    Racetech Rear Gold Valve
    (Stock Rear Spring)

    Frame:
    FZ1 Handlebar
    PUIG Frame Sliders
    T-Rex Rear Spool Adapters

    Work was all done by a local shop. XJ6 Conversion Parts were supplied by MOTOMATAKOS (Greece)

  2. #2
    Senior Member 98Deathmage's Avatar
    Join Date
    Jul 2013
    Location
    Columbia, Maryland
    Posts
    202
    Rep Power
    6

    Default

    GAWDDD That is smexy. I want to do it now knowing its possible in the US!
    Bike - '09 Blue FZ6r

    Mods - MotoDynamic Integrated Tail light, DMP Fender Eliminator, DDM Tuning HID 6000K, Ebay Blue Shorty Levers, MARTHY EXHAUST, Airbox Mod, Matte Black Ceramic Painted Headers

    Gear - HJC IS-16, Joe Rocket Atomic Jacket, Joe Rocket Boots, Scorpion Long Gauntlet Gloves, Drift HD-Ghost S, Sena SMH10

  3. #3

    Default

    W00t another person completed the conversion.
    2009 Team Yamaha Blue/White FZ6R/XJ6
    Mods: Proton Flush mounts(Shelved), BikeMaster Universal LED signals, Targa Fender Eliminator, Power Commander V, Marthy's Viper exhaust(now with baffle), AIS Block-off plates, off-brand adjustable/folding black clutch and brake levers, Apex 41mm universal clip-ons(sometimes), Renthal Ultra Low bars with bar ends/ ebay bar-end mirrors, XJ6N Body Panels, Reflective White rim tape.

  4. #4
    Junior Member
    Join Date
    Nov 2013
    Location
    Brooklyn
    Posts
    10
    Rep Power
    0

    Default

    Just wanted to also mention, the shop that did the work noted that the side fairings for the head light did not fit the FZ6R stock headlight.

    I had recalled seeing a thread that said that the FZ8 headlight was the same part (https://www.600cc.org/forum/showthread.php?t=26502)

    I had the shop check to see if an FZ8 headlight would fit and they confirmed that it does fit.

    I ordered the FZ8 headlight from a US dealer. It's probably worth mentioning that since the headlight is the same, you could probably order the side fairings for the FZ8 headlight from a US dealer.

    I am not sure if the mounting bracket is the same between the XJ6N and FZ8, so it is possible that you would still need the right mounting bracket for the XJ6N.

  5. #5

    Default

    I wondered about that since the headlight is slightly different between the 6R and the XJ. I'm currently trying to order the headlight fairing pieces but haven't heard back from Motomatakos yet. This is very helpful info. Thanks for providing that.
    2009 Team Yamaha Blue/White FZ6R/XJ6
    Mods: Proton Flush mounts(Shelved), BikeMaster Universal LED signals, Targa Fender Eliminator, Power Commander V, Marthy's Viper exhaust(now with baffle), AIS Block-off plates, off-brand adjustable/folding black clutch and brake levers, Apex 41mm universal clip-ons(sometimes), Renthal Ultra Low bars with bar ends/ ebay bar-end mirrors, XJ6N Body Panels, Reflective White rim tape.

  6. #6
    Junior Member
    Join Date
    Nov 2013
    Location
    Brooklyn
    Posts
    10
    Rep Power
    0

    Default

    They're on vacation until the end of the month. They should be back next week.

  7. #7
    World Most Bad A$$ 6R Marthy's Avatar
    Join Date
    Jun 2010
    Location
    Boynton Beach, FL
    Posts
    5,592
    Rep Power
    23

    Default

    Very well done with the $$$ spend all in the right spot! I couldn't have done it any better...

    Only thing that doesn't fit the bike are the pegs. Look into getting a FZ09 complete set instead. FZ09 mirrors look a bit more aggressive too but don't get me wrong... you have once of the nicest 6R I've seen in a very long time.
    Last edited by Marthy; 08-28-2014 at 08:47 AM.

    Martin

    Life is all about attitude. Be hard on yourself, easy on others.

    FZ6R sold...

  8. #8
    Junior Member
    Join Date
    Nov 2013
    Location
    Brooklyn
    Posts
    10
    Rep Power
    0

    Default

    Quote Originally Posted by Marthy View Post
    Very well done with the $$$ spend all in the right spot! I couldn't have done it any better...

    Only thing that doesn't fit the bike are the pegs. Look into getting a FZ09 complete set instead. FZ09 mirrors look a bit more aggressive too but don't get me wrong... you have once of the nicest 6R I've seen in a very long time.
    I appreciate the kind words!

    I'll actually look into the FZ09 mirrors. The XJ6N mirrors are terrible. It could be the position on the handle bars since I'm using Accossato brakes, I had to use after market mounts for the mirrors.

    I'll also look into the pegs, I had some eBay pegs that I provided to the shop, but they didn't fit on the bike, so I did intend on replacing them but the parts didn't end up on the bike.

  9. #9
    Senior Member blkbrd's Avatar
    Join Date
    Apr 2011
    Location
    Midland, ON
    Posts
    351
    Rep Power
    8

    Default

    That is a great looking bike!!! Amazing job!!
    2010 Raven FZ6R -- Shogun No-Cut Frame Sliders -- CF Tank Pad -- ZX6 Mirrors -- High Beam Garage Door Opener -- Two Brother's Black Series C/F Exhaust -- Power Commander V -- Galfer SS Brake Lines -- EBC Sintered HH Pads -- Oxford Heated Grips

  10. #10
    Super Moderator dart1963's Avatar
    Join Date
    Aug 2009
    Location
    Bluemont, Virginia
    Posts
    6,076
    Blog Entries
    2
    Rep Power
    24

    Default

    I'd more call it a naked conversion... street fighters look ugly, because, well, they've been wrecked and pieced together, or just leave reminders of what used to be a fairing.

    XJ conversion looks awesome, done right!
    _________________________________________

    Don | "Deer suck! Back on two's next year!"


Page 1 of 3 123 LastLast

Similar Threads

  1. My new fz6r street fighting conversion
    By Haven68 in forum FZ6R StreetFighter
    Replies: 3
    Last Post: 02-23-2017, 09:48 AM
  2. My street fighter mod on 2010 fz6r,
    By Haven68 in forum FZ6R Mods
    Replies: 10
    Last Post: 07-17-2014, 04:17 PM
  3. 03 R6 street fighter 2k good buy?
    By dx2killa in forum Non FZ6 Motorcycle Section
    Replies: 25
    Last Post: 07-25-2013, 09:17 PM
  4. Street fighter mod help
    By Piercebelton in forum FZ6R Mods
    Replies: 1
    Last Post: 06-11-2011, 06:06 PM
  5. New Kawi Street fighter
    By reiobard in forum Non FZ6 Motorcycle Section
    Replies: 17
    Last Post: 01-23-2009, 07:27 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •