Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 12 12311 ... LastLast
Results 1 to 10 of 114

Thread: Lwclancers - Projector Retrofit

  1. #1
    Senior Member lwclancers's Avatar
    Join Date
    Jul 2010
    Location
    Winchester, VA
    Posts
    489
    Rep Power
    13

    Default Lwclancers - Projector Retrofit

    Similar to JT, I am getting the headlight retrofit job done

    Today is my breakdown day, tomorrow I should be sending it off! I will post pics of my breakdown, then reassembly, and more than likely speed bumps that get in my way haha.

    First up is to clean up my garage and working area and baggies for labeling so I dont lose screws and parts
    ______________________________________________
    2010 FZ6R: White/Red/Black/Gold rims
    Lineup: Gatling Gun 2.0 HID Retrofit, TBR Carbon Fiber Exhaust, Juice Box Pro, T-Rex Spools, Yamaha bar end caps, Grip Puppies, Power Madd hand/wind deflectors, OES Frame Sliders, Tank pad, Levers, ZX6R Mirrors, Flushies, Zero Gravity windscreen, White FE, LED Signals, Luimoto Seat covers, LED Brake/Signals underseat mod

  2. #2
    Senior Member kevin8198's Avatar
    Join Date
    May 2011
    Location
    Spokane, WA
    Posts
    1,366
    Blog Entries
    1
    Rep Power
    12

    Default

    Reserved for jealous reply

    Edit: Ok, I can't be jealous now...because I have mine
    Last edited by kevin8198; 05-08-2013 at 04:44 PM.

  3. #3
    Insert title Here Scott_Thomas's Avatar
    Join Date
    Apr 2012
    Location
    Quakertown, PA.
    Posts
    4,874
    Rep Power
    22

    Default

    Same as Kevin! BillMeLater is pi$$ing me the F off. Gotta call those jacka$$es again today. Chad is waiting on me so he can order my parts.
    Mods: /Shogun Sliders/ C. Werkes FE/ ZX6R Mirrors/ Flushmounts/ POW Tank Pad/ PC5/ Driven BO's/ Shorty Levers/ Kuryakyn Throttle Lock - Bar Ends/ AHR - HID/ LEDs-Air Scoop/ T-rex Spools/ Woodcraft Clip-Ons/ Kuryakyn ISO Grips/ Puig Racing Screen/ Ram Mount/ / Stompgrip/ Red Rim Stripes/ Red Spike Bolts/ CF Gas Cap Cover/Billet Alum. Pegs/ MD Integrated Taillight/ Healtech GiPro GI/Airbox Mod/ Short V Stacks/ FZ6 Cams/ Galfer Stainless Braided Brake Lines/ Volar Sintered HH pads/ Ogio tailbag



  4. #4
    Senior Member lwclancers's Avatar
    Join Date
    Jul 2010
    Location
    Winchester, VA
    Posts
    489
    Rep Power
    13

    Default

    Ill try to go along with the sequence of pics...

    1. Remove the lower triangular piece behind the wheel connecting the 2 fairings. 4 bolts hold it on
    2. Remove the 4 upper bolts on the fairings
    3. Remove the 2 lower bolts on the fairings
    4. On the upper fairing bolts, there are thin plastic washers behind them, make sure you get them off so they dont scratch when being put back on
    5. Behind where the lower triangular piece was, there is a pin-fastener. Press the little tab IN, this will unlock the fastener, and you call pull it out.
    6. Behind the fairing, disconnect the turn signal: Pop up that little tab just a little, and the connections will separate
    7. Do the other turn signal (this is the right side, from the POV of the front of the bike looking back and under the fairing)
    8. Remove the upper piece between the fairing and the dash: there is one pin-fastener at the top, and a bolt at the bottom
    9. Pull this piece back towards the tank...once loose rotate UP...the middle lip will then come loose more easily (seen in the left of the pic)
    10. Remove the 2 pin-fasteners on the dash.
    Attached Images Attached Images
    • File Type: jpg 1.jpg (48.3 KB, 121 views)
    • File Type: jpg 2.jpg (59.2 KB, 104 views)
    • File Type: jpg 3.jpg (40.9 KB, 100 views)
    • File Type: jpg 4.jpg (83.7 KB, 100 views)
    • File Type: jpg 5.jpg (47.4 KB, 103 views)
    • File Type: jpg 6.jpg (39.7 KB, 100 views)
    • File Type: jpg 7.jpg (40.9 KB, 101 views)
    • File Type: jpg 8.jpg (43.9 KB, 100 views)
    • File Type: jpg 9.jpg (42.5 KB, 104 views)
    • File Type: jpg 10.jpg (58.2 KB, 128 views)
    Last edited by lwclancers; 03-30-2013 at 05:16 PM.
    ______________________________________________
    2010 FZ6R: White/Red/Black/Gold rims
    Lineup: Gatling Gun 2.0 HID Retrofit, TBR Carbon Fiber Exhaust, Juice Box Pro, T-Rex Spools, Yamaha bar end caps, Grip Puppies, Power Madd hand/wind deflectors, OES Frame Sliders, Tank pad, Levers, ZX6R Mirrors, Flushies, Zero Gravity windscreen, White FE, LED Signals, Luimoto Seat covers, LED Brake/Signals underseat mod

  5. #5
    Senior Member lwclancers's Avatar
    Join Date
    Jul 2010
    Location
    Winchester, VA
    Posts
    489
    Rep Power
    13

    Default

    11. Remove the 2 bolts for the dash
    12. Pull the dash towards the tank, it will come loose and you can lift up and remove it.
    ***I had a pic here for removing the mirrors, but saving pics due to reserved post and pic limits. Just remove the 2 nuts and the mirrors will come out. Then remove the rubber insert...keep note that little metal inserts in the rubber insert tend to pop out. I can post a pic later in this thread if anyone needs me to
    13. Remove the 4 bolts holding the air intake pieces. The 2 blue circles take note, there are small rubber washers on the back, reach behind and hold them so they dont fall. The 2 green circles are just the bolts
    ***Slide the air intake forward, towards the wheel
    15. After getting the air intake disengaged, pull the back fastener out, then the piece will be fully removed
    16. Back at the headlight:
    a. Remove the 2 green screws
    b. Remove the 2 blue bolts
    c. DONT remove the 2 red bolts I accidentally did these...its ok, but the bracket will then come off with the light and youll have to put them back later. No big deal, but save yourself 4 minutes and remove the blue bolts instead.
    17. The front faring and light are now loose, only thing holding it is the light connector
    18. Pull the turn signal wires through the plastic strap so they arent connected anymore
    19. Pull the light connector out...straight back
    20. Remove the one screw at the top of the wishbone...

    **The light is now free! (No more room for pics since I reserved these posts for pics)

    **Remove the wishbone from the light housing if you are doing any retrofit work. Take the brackets off the housing if you removed the wrong bolts like I did Go put the brackets back on the bike.

    I also took more pics...probably overkill for this thread, but, wanted to have some photo memory for when I put everything back together incase I forget. Also, I put everything in individually labeled baggies for re-assembly.
    Attached Images Attached Images
    Last edited by lwclancers; 03-30-2013 at 05:29 PM.
    ______________________________________________
    2010 FZ6R: White/Red/Black/Gold rims
    Lineup: Gatling Gun 2.0 HID Retrofit, TBR Carbon Fiber Exhaust, Juice Box Pro, T-Rex Spools, Yamaha bar end caps, Grip Puppies, Power Madd hand/wind deflectors, OES Frame Sliders, Tank pad, Levers, ZX6R Mirrors, Flushies, Zero Gravity windscreen, White FE, LED Signals, Luimoto Seat covers, LED Brake/Signals underseat mod

  6. #6
    Senior Member lwclancers's Avatar
    Join Date
    Jul 2010
    Location
    Winchester, VA
    Posts
    489
    Rep Power
    13

    Default

    [Reserved for new light upon arrival]
    ______________________________________________
    2010 FZ6R: White/Red/Black/Gold rims
    Lineup: Gatling Gun 2.0 HID Retrofit, TBR Carbon Fiber Exhaust, Juice Box Pro, T-Rex Spools, Yamaha bar end caps, Grip Puppies, Power Madd hand/wind deflectors, OES Frame Sliders, Tank pad, Levers, ZX6R Mirrors, Flushies, Zero Gravity windscreen, White FE, LED Signals, Luimoto Seat covers, LED Brake/Signals underseat mod

  7. #7
    Senior Member lwclancers's Avatar
    Join Date
    Jul 2010
    Location
    Winchester, VA
    Posts
    489
    Rep Power
    13

    Default

    [Reserved for reinstall 1]
    ______________________________________________
    2010 FZ6R: White/Red/Black/Gold rims
    Lineup: Gatling Gun 2.0 HID Retrofit, TBR Carbon Fiber Exhaust, Juice Box Pro, T-Rex Spools, Yamaha bar end caps, Grip Puppies, Power Madd hand/wind deflectors, OES Frame Sliders, Tank pad, Levers, ZX6R Mirrors, Flushies, Zero Gravity windscreen, White FE, LED Signals, Luimoto Seat covers, LED Brake/Signals underseat mod

  8. #8
    Senior Member lwclancers's Avatar
    Join Date
    Jul 2010
    Location
    Winchester, VA
    Posts
    489
    Rep Power
    13

    Default

    [Reserved for reinstall 2]
    ______________________________________________
    2010 FZ6R: White/Red/Black/Gold rims
    Lineup: Gatling Gun 2.0 HID Retrofit, TBR Carbon Fiber Exhaust, Juice Box Pro, T-Rex Spools, Yamaha bar end caps, Grip Puppies, Power Madd hand/wind deflectors, OES Frame Sliders, Tank pad, Levers, ZX6R Mirrors, Flushies, Zero Gravity windscreen, White FE, LED Signals, Luimoto Seat covers, LED Brake/Signals underseat mod

  9. #9
    Lumen Junkie Rabbitman109's Avatar
    Join Date
    Jul 2010
    Location
    Chambersburg, PA
    Posts
    3,755
    Blog Entries
    1
    Rep Power
    18

    Default

    Reserved for post thanking positive comments.
    Chad aka "The Original Mod Whore"

    Youtube
    : Rabbitman's YouTube FZ1 mods: Mod Whore Central
    Quote Originally Posted by Heineken View Post
    I, the self proclaimed Gear Whore say: Hail the Mods Whore. )

  10. #10
    Senior Member lwclancers's Avatar
    Join Date
    Jul 2010
    Location
    Winchester, VA
    Posts
    489
    Rep Power
    13

    Default

    [Reserved for reinstall 3]
    ______________________________________________
    2010 FZ6R: White/Red/Black/Gold rims
    Lineup: Gatling Gun 2.0 HID Retrofit, TBR Carbon Fiber Exhaust, Juice Box Pro, T-Rex Spools, Yamaha bar end caps, Grip Puppies, Power Madd hand/wind deflectors, OES Frame Sliders, Tank pad, Levers, ZX6R Mirrors, Flushies, Zero Gravity windscreen, White FE, LED Signals, Luimoto Seat covers, LED Brake/Signals underseat mod

Page 1 of 12 12311 ... LastLast

Similar Threads

  1. FZ Forum HID Projector Retrofit Group Buy
    By Rabbitman109 in forum Group Purchases
    Replies: 86
    Last Post: 01-30-2014, 06:52 PM
  2. JT's - Projector Retrofit
    By JT in forum FZ6R Mods
    Replies: 62
    Last Post: 09-17-2013, 11:50 AM
  3. Chad's HID Projector Retrofit
    By Rabbitman109 in forum Non FZ6 Motorcycle Section
    Replies: 3
    Last Post: 05-03-2013, 01:23 PM
  4. My Custom Designed Projector Retrofit
    By SpawnXX in forum FZ6R Mods
    Replies: 28
    Last Post: 03-20-2013, 01:29 AM
  5. Projector retrofit kit
    By 99vengeur in forum Bikes/Parts For Sale
    Replies: 1
    Last Post: 01-25-2012, 02:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •