Search:

Type: Posts; User: Rumpig

Page 1 of 11 1 2 3 4

Search: Search took 1.39 seconds.

  1. Thread: Why we ride

    by Rumpig
    Replies
    3
    Views
    147

    I bought my first bike at the same time as i was...

    I bought my first bike at the same time as i was doing a hang gliding course. bikes and gliders are both steered by leaning them over so a very similar feeling but riding a motorbike is like having a...
  2. Replies
    8
    Views
    206

    The starter motor is also the alternator so if...

    The starter motor is also the alternator so if it's shagged the battery won't be charging which is the cause of your problems. You'll need a new stator (starter/alternator)
  3. Yeah gold valves are cartridge emulators, just...

    Yeah gold valves are cartridge emulators, just installing them stops the front diving so upgrading springs isn't really necessary, up to you. Hyperpro's website is shit, it's probably easier to...
  4. Put Racetech gold valves and 20w oil in the forks...

    Put Racetech gold valves and 20w oil in the forks and i think Hyper Pro make upgraded rear springs for the standard rear shock, their aftermarket rear shock isn't cheap.
  5. This is the factory sensor on an Australian bike...

    This is the factory sensor on an Australian bike . The bolt behind it is for an aftermaket O2 gauge .40124
  6. Replies
    3
    Views
    176

    There's a few companies in Brazil flashing the...

    There's a few companies in Brazil flashing the FZ6R / XJ6 , vids on youtube. Ecuwest in Australia claim to do it to. Search for Piasini agents , should be some in the States.
    Marthy's cam swap is a...
  7. All the old timers reckon Sheepskin is the best...

    All the old timers reckon Sheepskin is the best thing for touring.
  8. Replies
    5
    Views
    224

    I tried LED, low beam was better high beam was...

    I tried LED, low beam was better high beam was crap. Went back to standard.
  9. Thread: Helmet camera

    by Rumpig
    Replies
    6
    Views
    414

    Michael Schumacher had a gopro strapped to his...

    Michael Schumacher had a gopro strapped to his helmet when he had his snow skiing accident. Hasn't been seen in public since.
  10. Replies
    3
    Views
    465

    http://www.dan-moto.com/index.php?main_page=produc...

    http://www.dan-moto.com/index.php?main_page=product_info&cPath=1_36_95&products_id=946
  11. Replies
    1
    Views
    422

    There are no know changes to power output across...

    There are no know changes to power output across the FZ6R by year, there are minor differences between U.S models and the rest of the world but only minor. The previous version the FZ6 was still...
  12. Replies
    14
    Views
    1,004

    Closer to 73mm.39409

    Closer to 73mm.39409
  13. Thread: weather...

    by Rumpig
    Replies
    15
    Views
    915

    Had 8 feet of rainfall this wet season, haven't...

    Had 8 feet of rainfall this wet season, haven't ridden much.
  14. Replies
    14
    Views
    1,004

    The FZ6 and FZ6R throttle bodies are...

    The FZ6 and FZ6R throttle bodies are interchangeable, the outside diameter is the same it's the inside diameter that is different. 36mm for the FZ6 and 32mm for the 6R. You'll need an ecu to run it...
  15. Replies
    9
    Views
    448

    I didn't replace the rears, front still had heaps...

    I didn't replace the rears, front still had heaps of pad after 39 000 km so they stayed in to. There's 3 different types of EBC too, standard, track day, and race.
  16. Replies
    9
    Views
    448

    Shiny ones rear brake , crusty one is front. You...

    Shiny ones rear brake , crusty one is front. You just learnt the same lesson as me. Better marking on the package would help.
  17. Replies
    21
    Views
    2,391

    Being that exhaust clips together i'd be worried...

    Being that exhaust clips together i'd be worried about using it on a bike with an O2 sensor. If it sucks air in thru the joints it will affect the AFR reading.
  18. Replies
    110
    Views
    8,810

    "But dude, you have this ability! So why then are...

    "But dude, you have this ability! So why then are you shipping.....??????
    If I'm guessing correctly, are we headed towards Cookie Cutter plan based upon the recipe of another? Is that the correct...
  19. Replies
    3
    Views
    588

    Should be fine I reckon, 2 months isn't that long.

    Should be fine I reckon, 2 months isn't that long.
  20. Replies
    110
    Views
    8,810

    Holy Shit ! Lot of work making that happen. I've...

    Holy Shit ! Lot of work making that happen. I've got a FZ6 MAP sensor, I just did the throttle body swap and had to use my original as the elec plug is different.

    I emailed mmcflash and they can...
  21. Replies
    9
    Views
    592

    Get a 50mm washer drill the hole out to around...

    Get a 50mm washer drill the hole out to around 18mm and take your slip on off, put the washer in and put the slip on back on. It should be pinned in as the reducer is 50mm. Chokes it off a bit but...
  22. Replies
    12
    Views
    2,274

    FZ6 cams FZ6 throttle bodies (doing that now)...

    FZ6 cams
    FZ6 throttle bodies (doing that now)
    power commander or remap - theres a bloke in brazil that does it, racebike remap.
    If your not worried about top speed lower the gearing.
  23. Replies
    110
    Views
    8,810

    If you look at the timing maps in 3d they're...

    If you look at the timing maps in 3d they're pretty wonky at higher throttle positions. If your tuner has specific timing values in mind for NOS I can make them the values he wants though our bikes...
  24. Replies
    110
    Views
    8,810

    i've got 2 u.s ones i'm using and my oz one. I...

    i've got 2 u.s ones i'm using and my oz one. I can mod my oz one and send it to you to try if you like. Pretty sure the immobilizer is separate to the ecu so it should work fine. I can raise the rev...
  25. Replies
    110
    Views
    8,810

    Yeah I can do that, do you want it in every gear,...

    Yeah I can do that, do you want it in every gear, there's three separate maps.

    I wrote the U.S bin file onto my ozzie ecu and it worked fine on my bike so I don't see the number change being a...
Results 1 to 25 of 258
Page 1 of 11 1 2 3 4